Real-time robotic control demands fast action generation. However, existing generative policies based on diffusion and flow matching require multi-step sampling, fundamentally limiting deployment in time-critical scenarios. We propose Dispersive MeanFlow Policy Optimization (DMPO), a unified framework that enables true one-step generation through three key components: MeanFlow for mathematically-derived single-step inference without knowledge distillation, dispersive regularization to prevent representation collapse, and reinforcement learning (RL) fine-tuning to surpass expert demonstrations. Experiments across RoboMimic manipulation and OpenAI Gym locomotion benchmarks demonstrate competitive or superior performance compared to multi-step baselines. With our lightweight model architecture and the three key algorithmic components working in synergy, DMPO exceeds real-time control requirements (>120Hz) with 5-20x inference speedup, reaching hundreds of Hertz on high-performance GPUs. Physical deployment on a Franka-Emika-Panda robot validates real-world applicability.

Transfer learning promises to reduce the high sample complexity of deep reinforcement learning (RL), yet existing methods struggle with domain shift between source and target environments. Policy distillation provides powerful tactical guidance but fails to transfer long-term strategic knowledge, while automaton-based methods capture task structure but lack fine-grained action guidance. This paper introduces Context-Aware Distillation with Experience-gated Transfer (CADENT), a framework that unifies strategic automaton-based knowledge with tactical policy-level knowledge into a coherent guidance signal. CADENT's key innovation is an experience-gated trust mechanism that dynamically weighs teacher guidance against the student's own experience at the state-action level, enabling graceful adaptation to target domain specifics. Across challenging environments, from sparse-reward grid worlds to continuous control tasks, CADENT achieves 40-60\% better sample efficiency than baselines while maintaining superior asymptotic performance, establishing a robust approach for adaptive knowledge transfer in RL.

Vision-based 3D human motion capture from videos remains a challenge in computer vision. Traditional 3D pose estimation approaches often ignore the temporal consistency between frames, causing implausible and jittery motion. The emerging field of kinematics-based 3D motion capture addresses these issues by estimating the temporal transitioning between poses instead. A major drawback in current kinematics approaches is their reliance on Euler angles. Despite their simplicity, Euler angles suffer from discontinuity that leads to unstable motion reconstructions, especially in online settings where trajectory refinement is unavailable. Contrarily, quaternions have no discontinuity and can produce continuous transitions between poses. In this paper, we propose QuaMo, a novel Quaternion Motions method using quaternion differential equations (QDE) for human kinematics capture. We utilize the state-space model, an effective system for describing real-time kinematics estimations, with quaternion state and the QDE describing quaternion velocity. The corresponding angular acceleration is computed from a meta-PD controller with a novel acceleration enhancement that adaptively regulates the control signals as the human quickly changes to a new pose. Unlike previous work, our QDE is solved under the quaternion unit-sphere constraint that results in more accurate estimations. Experimental results show that our novel formulation of the QDE with acceleration enhancement accurately estimates 3D human kinematics with no discontinuity and minimal implausibilities. QuaMo outperforms comparable state-of-the-art methods on multiple datasets, namely Human3.6M, Fit3D, SportsPose and AIST. The code is available at https://github.com/cuongle1206/QuaMo

Designing dense reward functions is pivotal for efficient robotic Reinforcement Learning (RL). However, most dense rewards rely on manual engineering, which fundamentally limits the scalability and automation of reinforcement learning. While Vision-Language Models (VLMs) offer a promising path to reward design, naive VLM rewards often misalign with task progress, struggle with spatial grounding, and show limited understanding of task semantics. To address these issues, we propose MARVL-Multi-stAge guidance for Robotic manipulation via Vision-Language models. MARVL fine-tunes a VLM for spatial and semantic consistency and decomposes tasks into multi-stage subtasks with task direction projection for trajectory sensitivity. Empirically, MARVL significantly outperforms existing VLM-reward methods on the Meta-World benchmark, demonstrating superior sample efficiency and robustness on sparse-reward manipulation tasks.

The hypersonic unstart phenomenon poses a major challenge to reliable air-breathing propulsion at Mach 5 and above, where strong shock-boundary-layer interactions and rapid pressure fluctuations can destabilize inlet operation. Here, we demonstrate a deep reinforcement learning (DRL)- based active flow control strategy to control unstart in a canonical two-dimensional hypersonic inlet at Mach 5 and Reynolds number $5\times 10^6$. The in-house CFD solver enables high-fidelity simulations with adaptive mesh refinement, resolving key flow features, including shock motion, boundary-layer dynamics, and flow separation, that are essential for learning physically consistent control policies suitable for real-time deployment. The DRL controller robustly stabilizes the inlet over a wide range of back pressures representative of varying combustion chamber conditions. It further generalizes to previously unseen scenarios, including different back-pressure levels, Reynolds numbers, and sensor configurations, while operating with noisy measurements, thereby demonstrating strong zero-shot generalization. Control remains robust in the presence of noisy sensor measurements, and a minimal, optimally selected sensor set achieves comparable performance, enabling practical implementation. These results establish a data-driven approach for real-time hypersonic flow control under realistic operational uncertainties.

Infrastructure inspection is becoming increasingly relevant in the field of robotics due to its significant impact on ensuring workers' safety. The harbor environment presents various challenges in designing a robotic solution for inspection, given the complexity of daily operations. This work introduces an initial phase to identify critical areas within the port environment. Following this, a preliminary solution using a quadruped robot for inspecting these critical areas is analyzed.

Reinforcement Learning (RL) agents often struggle in real-world applications where environmental conditions are non-stationary, particularly when reward functions shift or the available action space expands. This paper introduces MORPHIN, a self-adaptive Q-learning framework that enables on-the-fly adaptation without full retraining. By integrating concept drift detection with dynamic adjustments to learning and exploration hyperparameters, MORPHIN adapts agents to changes in both the reward function and on-the-fly expansions of the agent's action space, while preserving prior policy knowledge to prevent catastrophic forgetting. We validate our approach using a Gridworld benchmark and a traffic signal control simulation. The results demonstrate that MORPHIN achieves superior convergence speed and continuous adaptation compared to a standard Q-learning baseline, improving learning efficiency by up to 1.7x.

Reinforcement learning (RL) has the potential to transform real-world decision-making systems by enabling autonomous agents to learn from experience. Deploying RL in real-world settings, especially in the context of human-robot interaction, requires defining state representations and reward functions, which are critical for learning efficiency and policy performance. Traditional RL approaches often rely on domain expertise and trial-and-error, necessitating extensive human involvement as well as direct interaction with the environment, which can be costly and impractical, especially in complex and safety-critical applications. This work proposes a novel RL framework that leverages off-policy evaluation (OPE) for state space and reward function selection, using only logged interaction data. This approach eliminates the need for real-time access to the environment or human-in-the-loop feedback, greatly reducing the dependency on costly real-time interactions. The proposed approach systematically evaluates multiple candidate state representations and reward functions by training offline RL agents and applying OPE to estimate policy performance. The optimal state space and reward function are selected based on their ability to produce high-performing policies under OPE metrics. Our method is validated on two environments: the Lunar Lander environment by OpenAI Gym, which provides a controlled setting for assessing state space and reward function selection, and a NASA-MATB-II human subjects study environment, which evaluates the approach's real-world applicability to human-robot teaming scenarios. This work enhances the feasibility and scalability of offline RL for real-world environments by automating critical RL design decisions through a data-driven OPE-based evaluation, enabling more reliable, effective, and sustainable RL formulation for complex human-robot interaction settings.

For active intervention tasks in underwater environments, the use of autonomous vehicles is just now emerging as an active area of research. During operation, for various reasons, the robot might find itself on a collision course with an obstacle in its environment. In this paper, a switching Nonlinear Model Predictive Control (NMPC) strategy is proposed to safely handle collisions for an Underwater Vehicle-Manipulator System (UVMS). When avoiding the collision is impossible, the control algorithm takes advantage of the manipulator, using it to push against the obstacle, and deflect away from the collision. Virtual experiments are performed to demonstrate the algorithm's capability to successfully detect collisions and either avoid them, or use the manipulator to handle them appropriately without damaging sensitive areas of the vehicle.