This paper presents dynamics-relaxed model predictive control (DR-MPC), a novel MPC formulation for legged locomotion, and a tailored interior-point method (IPM) solver. The formulation combines online optimization feasibility by construction with a contact-aware input parameterization. DR-MPC moves the dynamics equality and affine input constraints into quadratic penalties and retains only nonempty box constraints. The resulting box-constrained quadratic program (QP) has a block-arrow Hessian that enables the state and affine-output directions to be eliminated through a Schur complement. The solver factors only the reduced control system after swing-force elimination and contact-aligned move blocking. For the evaluated implementations using the same DR-MPC formulation, our method achieves median end-to-end MPC speedups of $16.0\times$ over HPIPM and $4.4\times$ over OSQP, with comparable locomotion performance in simulation. DR-MPC achieves a median onboard MPC end-to-end time of $4.4$ ms and is validated on a Unitree Go1 quadruped. Open-source code will be made available after publication.

Robots are moving out of the structured factory floor and into unstructured environments such as disaster sites, planetary surfaces, and agricultural fields, for which the right robot often does not yet exist. We present GLAMDRING, a framework that synthesizes the optimal robot for a locomotion task and, jointly, learns the controller that drives it. For the given specifications of forward-velocity bounds, a per-actuator power budget, an actuator library, and a payload requirement, GLAMDRING returns a matched quadruped morphology (link geometry and per-joint actuators) and a Hopf-oscillator Central Pattern Generator (CPG) gait policy. We rank feasible designs against a target design objective, viz., maximum speed, minimum Cost of Transport (CoT), or max Payload Margin. Because body and locomotion are coupled, the optimal morphology dictates how a robot is driven, while optimal gait depends on the physical body. We train a small number of CPG policies by reinforcement learning across the space of candidate morphologies, co-learning the gait with the underlying robot hardware. Link lengths and actuators are then resolved post-hoc from the policy's logged operating envelope, reducing synthesis cost to a small, fixed number of reinforcement-learning runs instead of one per candidate. Our experiments show three key findings: co-designing body and gait is necessary to satisfy locomotion constraints; actuator-envelope feasibility, rather than locomotion success alone, determines realizable payload capacity; and canonical animal gaits emerge naturally in most designs from morphology and constraints alone. A real-world demonstration further highlights the efficacy of our work.

Daily locomotion encompasses diverse activities and frequent transitions between them, yet most exoskeleton controllers are designed for a single activity or a narrow set of related movements. Changes in activity therefore typically require explicit mode switching and separately tuned or retrained controllers. Simulation-based learning reduces the need for hardware-based tuning but generally retains this limitation. Here we present UniExo, a framework that first constructs a multi-skill musculoskeletal human policy and then jointly trains an exoskeleton control policy with it. Four single-skill imitation experts for walking, turning, running and backward walking are distilled into a single network structured by a skill latent and subsequently fine-tuned through reinforcement learning on transition sequences. The resultant unified human policy achieves a mean tracking success rate of 94.7% on unseen clips of the four skills and exhibits greater robustness to perturbations than its constituent experts. A single hip exoskeleton controller (UniExo) is initialized from hip moment prediction of the human policy and co-adapted with it through multi-agent reinforcement learning across the four skills. This co-adaptation shifts the timing of the assistance torque and raises the fraction of positive work delivered to the hip. When deployed on a custom hip exoskeleton, the controller generalizes across four treadmill speeds in six participants and assists one participant through a continuous route of all four skills and their transitions, without skill labels or explicit mode switching. UniExo thus provides a step towards replacing activity-specific controllers with unified, user-specific controllers that support diverse locomotor activities and the transitions between them.

Learning visual policies for locomotion and manipulation requires coordinating contact with the environment and can incur substantial computation and GPU memory costs. First-order policy gradients (FoPG) reduce training cost through differentiable simulation, but local optimization can converge to unintended contact patterns. To address this shortfall, we propose Sampling-Guided Policy Search (SGPS), which couples recurring action-target refinement by sampling-based model-predictive control with first-order policy optimization. Behavior cloning initializes the policy from sampled actions; training then alternates sampling-based refinement with short-horizon FoPG updates under perturbed initial states and randomized dynamics. For visual policy training, we use a decoupled FoPG formulation that excludes rendering from the computation graph, enabling direct learning from depth observations without a state-policy teacher. On a single GPU, SGPS learns policies for locomotion, obstacle traversal, crate pushing, and bimanual carrying on simulated Unitree Go2 and G1 robots. Our experiments further show that refinement improves policy learning beyond initialization and tracking alone. For hardware deployment, the distilled policy transfers zero-shot to a real Go2 and uses onboard depth to autonomously trot, crawl, clear hurdles, and switch between these behaviors.

Mechanical intelligence, loosely defined as the reduction in control burden afforded by a robot's physical form, has become a prominent concept in robotics, with instantiations in bioinspired robotics, soft robotics, robotic swarms, and many other areas. However, rigorous theoretical understanding and quantitative measures of mechanical intelligence have lagged behind the engineering systems that the community has developed. In this work, using modern legged robots as a benchmark and exemplar, we propose several information-theoretic metrics for quantifying mechanical intelligence. By viewing body dynamics as both a computational process and a communication channel, we show that several prior insights in legged-robot engineering can be described using information theory, and we quantify how bits are processed by mechanical modes and across robot coordinates. Specifically, we examine the trade-off between explicitly incorporating compliance through series-elastic actuation and using so-called proprioceptive, low-gear-ratio transmissions, and we explore how these mechanisms interact with control policies during locomotion. We develop these results on systems of increasing complexity: a simplified linear model of a robot-leg transmission, a nonlinear single-leg simulation, and simulated quadruped robots controlled by a learned policy while navigating challenging terrain. These results lay the groundwork for broader study of robot mechanisms and their role in embodied computation.

Research in humanoid robotics has achieved rapid progress in locomotion, and recent results have pushed the boundary on autonomous navigation. We demonstrate that a standard single-stage RL navigation pipeline struggles to scale to multi-level and multi-story terrain, limited by the difficulty of complex humanoid terrain interactions such as stairs. To overcome this challenge, we decompose the navigation problem into two pieces. First, we train a policy operating on the reduced order dynamics but with full 3D LiDAR observations to navigate complex, multi-story terrain. We then utilize this navigation knowledge to kickstart a policy operating on the full-order humanoid dynamics, with a frozen locomotion policy in the loop. Additionally, we demonstrate that applying a Poisson safety filter to the navigation policy output recovers safety in the presence of out-of-distribution obstacles, without dropping navigation success rate. We demonstrate the resulting RoM-Nav policy on a Unitree G1, accomplishing mapless multi-floor navigation covering trials with over 10m of vertical displacement and over 100m of path length. Project page with videos https://wdc3iii.github.io/rom-nav/ .

Animal demonstrations provide quadruped robots with natural and distinctive gait styles that are difficult to specify through hand-crafted rewards. However, their narrow directional coverage leaves little style-consistent supervision for backward, lateral, and turning commands. We present OmniMimic, a training framework that turns directionally limited animal demonstrations into a single multi-gait policy over target per-axis velocity ranges. OmniMimic first combines temporal reversal, constrained dynamics completion, and sagittal reflection to construct robot-specific kinematic and physical supervision beyond the observed directions. It then expands commands progressively from the demonstrated velocity distribution toward the target per-axis bounds, and uses a shared actor with soft-gated, gait-specialized residual experts to balance reusable locomotion skills with gait-specific corrections. Across four gaits in simulation, OmniMimic reduces mean foot-position RMSE at forward and backward reference velocities by 12.9% and velocity-tracking RMSE on a uniform Cartesian command grid by 63.1%, compared with the matched APEX baseline. The project page is at https://OmniMimic.github.io.

Reinforcement learning constitutes a promising approach owing to its potential for superhuman performance and self-learned policies. However, its application to real-world autonomous driving remains scarce, particularly in unstructured environments, because of the challenges associated with sim-to-real transfer for unstructured environments. In this work, we present MILER, an end-to-end policy framework with zero-shot sim-to-real transfer. During offline training, we employ a custom semantic mid-level representation (MLR) simulator and train the policy network using reinforcement learning, with its control outputs applied directly to a bicycle model. During deployment on the real vehicle, camera and LiDAR data are processed by BEVFusion to generate a semantic bird's-eye-view representation consistent with that of the MLR simulator. The actions generated by the policy network are not applied directly to the real vehicle. Instead, we employ a trajectory-alignment strategy that enables zero-shot sim-to-real transfer of both perception and control. We extensively evaluate the proposed framework on a diverse test track comprising numerous challenges, including various obstacles, hairpin curves, velocities of up to 33.6 km/h, and off-road sections. In total, we drove 17.3 km with two different vehicles on a 3.0 km test track without human intervention, thereby demonstrating the effectiveness of our approach. Furthermore, the entire software stack runs on a Jetson AGX Orin.