Papers for 2026-09-20
10 papersReal-World Reinforcement Learning with MPC Scaffolding for Dexterous Manipulation
原摘要
Real-world reinforcement learning (RL) offers a promising route to dexterous manipulation policies that can adapt directly from physical interaction, but learning is hindered by inefficient early exploration and costly failures. We propose a framework that uses sampling-based model predictive control (MPC) as scaffolding for real-world dexterous RL, providing structured prior experience and task-directed guidance during learning without human demonstrations or corrective actions. A small set of MPC trajectories is first used to populate an offline replay buffer and to pretrain the actor and critic. During online learning, MPC intermittently guides data collection while an off-policy Soft Actor-Critic learner trains from both prior MPC experience and newly collected physical interaction, with control gradually transitioning to the learned policy. On continuous in-hand rotation with a 16-DoF Allegro hand, initialized from 20 MPC trajectories collected in 12 minutes on hardware, the policy reaches 100\% success after 7 minutes of online RL, with about three object drops on average during training. After 20 minutes of online learning, the policy achieves more than five times the rotation speed of the MPC controller and completes 1000 consecutive rotations without a drop. Ablations show complementary benefits from MPC-based pretraining, retained MPC experience, and online MPC guidance, while additional experiments demonstrate rapid adaptation to new object geometries and successful goal-conditioned reorientation.
原摘要
Although vision-language models (VLMs) possess strong visual understanding and reasoning capabilities, existing vision-and-language navigation (VLN) agents struggle to connect semantic reasoning with spatial execution. Two coupled gaps remain in this connection, as intermediate reasoning is not explicitly anchored to visual evidence and high-level decisions lack precise spatial goals to guide low-level motion. Cognitive science suggests that human navigation bridges these levels hierarchically by anchoring cognition to relevant landmarks and guiding locomotion toward spatial goals. Motivated by this principle, we propose GroundingVLN, which uses visual grounding as a shared interface between reasoning and action. GroundingVLN first reasons with grounding by anchoring task-relevant visual evidence to precise image locations throughout structured reasoning. It then acts through grounding by predicting a progress-aligned pixel goal that a geometric planner translates into primitive actions. To learn these capabilities, we construct GroundingCOTVLN-188K, a dataset of temporally aligned grounded reasoning traces, and introduce Grounded and Execution-Aware Reinforcement Learning (GEAR), which aligns grounded reasoning and spatial decisions with downstream execution. Experiments demonstrate that GroundingVLN achieves state-of-the-art performance (69.9% SR on R2R-CE and 75.1% SR on RxR-CE) with high sample efficiency, using just 0.9% as much training data as the strongest baseline. It also generalizes strongly across datasets, attaining 59.9% SR on RxR-CE when trained solely on R2R, a gain of 20.1% over the strongest baseline.
原摘要
Assembly, wear, and component replacement perturb the sensor extrinsics and joint zeros encoded by a humanoid CAD model. Existing procedures calibrate one sensor pair or require external fiducials. Using only robot-native motion and onboard sensing, we present OmniCalib, a target-free workflow that calibrates the full upper limbs---all 14 arm joint zeros and the extrinsics of both wrist and chest cameras---as well as lower limbs and the multi-camera head rig. Each module matches a robot-native task to a parameter block, checks observability, and writes only supported corrections to the CAD model. Our depth ICP method recovers all 14 arm joint zeros and calibrates all RGB-D camera extrinsics without any calibration target. Relative to CAD, the estimated extrinsic corrections are 10.56 mm and 1.74 degrees for the left wrist, 6.33 mm and 1.25 degrees for the right wrist, and 9.81 mm and 0.929 degrees for the chest RGB-D camera. ICP point-to-plane residual is 2.09 mm. On the same injected offsets, ICP and ArUco recover all 14 joint zeros below the 0.1-degree encoder-resolution reference. On an AGIBOT A3 Ultra humanoid, four static double-support stances recover all 12 lower-limb joint-zero offsets injected with an RMS error of 0.063 degrees. The head module combines multi-camera visual odometry with legged odometry and dynamic compensation through the live ROS transform tree. Using only planar walking, it attains a mean SO(3) error of 1.061 degrees across three sequences. The best sequence reaches 0.775 degrees, competitive with iKalibr at 0.902 degrees from rich 6-DOF excitation. Rig-relative angles repeat within 0.140 degrees. Injection recovery and held-out tests validate each observable block.
CALOS: Control-Affine Lyapunov On-manifold Safety Layer for Safe Deep Reinforcement Learning for Quadrotors
原摘要
Deep Reinforcement Learning has demonstrated remarkable capability in quadrotor control, yet learned policies offer no guarantee of respecting safety constraints during training or deployment. We present CALOS (Control-Affine Lyapunov On-manifold Safety), a runtime safety layer that enforces attitude constraints on a quadrotor without modifying the underlying learning algorithm. CALOS formulates four tilt-angle inequalities and a Lyapunov descent condition as a single quadratic program whose solution is the minimum-norm correction to the nominal torque output of the policy. The quadratic program is solved exactly via active-set enumeration over the three-dimensional torque space, with a computational cost low enough to enforce constraints in real time across thousands of parallel simulation environments, as required by modern massively parallel Deep Reinforcement Learning training. Evaluated on trajectory-tracking tasks in NVIDIA Isaac Lab, CALOS reduces lateral tracking error by 55-60% relative to an unconstrained Proximal Policy Optimization baseline while achieving zero attitude-constraint violations on the training trajectory. By restricting exploration to safe regions of the state space, the safety layer also accelerates training convergence and improves data efficiency without producing suboptimal policies.
WeaveRL: Weaving Reconstruction into Scene-Aware Fabrics for Perceptive Reinforcement Learning
原摘要
Reinforcement learning allows robots to acquire complex skills, but producing policies for geometrically complex manipulation remains difficult. A promising approach is to learn on top of collision-avoidant controllers, such as geometric fabrics. However, these approaches have relied on static, hand-specified representations of the scene. Integrating active, online 3D perception into massively parallel RL training has so far been inaccessible. We introduce a GPU-accelerated method that reconstructs the scene as a collection of surfels across thousands of parallel simulation instances during active rollouts. This lets policies operate over sensor-derived, rather than hand-specified, geometry. On a suite of collision-dense manipulation tasks, our surfel fabrics enable policies to tackle geometrically complex scenes where primitive-based baselines fail, while maintaining sim-to-real transfer. Furthermore, policies learned with a scene-aware fabric are more robust to the introduction of novel geometry at test time, improving collision-free task completion under unseen obstacles from 35% to 61%. We release our reconstruction system, training code and test dataset to spur research in this direction.
Visual Sim-to-Real Learning for Robotic Insertion under Geometric Variations: Application to Rebar Installation
原摘要
Rebar insertion is among the most repetitive and physically demanding tasks on construction sites, and a contact-rich problem at 1.4 mm clearance. The parts, however, vary at two levels: a nominal design per structural member, and fabrication tolerance around each nominal design. Real-world data therefore has to be re-collected as designs and batches change. We present RebarSim, a visual sim-to-real system trained entirely in simulation. A privileged state-based teacher is trained with reinforcement learning over procedurally generated rebar geometries, then distilled into a multi-view student that maps raw RGB and proprioception directly to actions under extensive domain randomization. The student transfers to the real world zero-shot, seating rebars taken from a real factory production run in 91.3% of real-robot rollouts. Underlying that result, geometry diversity and pretraining both bring benefits. Training across a diverse set of nominal designs rather than one lifts the zero-shot success of both the teacher and the student on unseen designs, and the student policy outperforms a single-design specialist on that specialist's own design. A pretrained student then adapts to a new design with 4--6x fewer distillation samples than one trained from scratch. Visual sim-to-real transfer depends on appearance randomization and the DAgger mixture: removing either one sharply lowers success. Videos, code, and task assets are available at https://rebarsim.github.io.
Feedback-Modulated Harmonic Policies for Quadruped Locomotion
原摘要
Learned quadruped locomotion policies commonly map observations directly to joint-level actions, leaving the periodic structure of locomotion implicit in the policy. We investigate an alternative representation in which each joint trajectory is expressed as a command-conditioned Fourier series and modified online using feedback from the robot state. A context network generates the Fourier coefficients and the weights of a per-step feedback network, whose outputs adjust joint offsets, harmonic gains, frequency, and phase during execution. In simulation, we examine this explicit frequency structure alongside the hidden activations of an MLP policy that directly outputs joint targets. The harmonic waveforms change frequency and shape with commanded speed. Dynamic mode decomposition of selected MLP rollouts reveals dominant activation modes near the foot-height oscillation frequency and its second harmonic, showing periodic structure without an explicit Fourier generator. On a Unitree Go2, the simulation-trained harmonic controller records a provisional onboard-estimated peak speed of 3.67 meter per second and carries added loads up to 5.883 kilogram in separate trials.
Learning Multi-Humanoid Pickup and Transport via Decentralized Object-Centric Control
原摘要
We study cooperative multi-humanoid pickup and transport of objects with varying size, weight, and geometry, requiring robot teams of different sizes. Our approach uses decentralized object-centric control, where each humanoid is assigned a local attachment region on the shared object and learns to realize pickup and transport through gripperless bimanual pinching. This attachment-based interface provides a common control abstraction spanning single-robot pickup, cooperative multi-robot transport, and robot-to-robot handover, without per-task redesign. We find that policies trained only on single-robot pickup already transfer nontrivially to cooperative settings, suggesting that this abstraction captures much of the structure needed for coordination. At the same time, explicit multi-robot training further improves performance, showing that shared-object coupling introduces coordination dynamics that are beneficial to learn directly. We validate the approach in simulation across varying team sizes and object geometries, and demonstrate sim-to-real transfer on hardware, where the learned controllers enable real humanoids to perform cooperative manipulation tasks.
WholeBodyWAM: Learning Whole-Body World Action Models with Scalable Motion Priors
原摘要
Humanoid whole-body manipulation requires coordinated whole-body dynamics, yet large-scale trajectories from a target robot are expensive to collect and difficult to scale. In contrast, whole-body motion from human and humanoid sources is abundantly available, although such data cannot be directly used as embodiment-specific robot actions. This work asks whether these scalable motion resources can instead provide a transferable predictive prior for humanoid world-action modeling. We introduce WholeBodyWAM, a humanoid world-action model that learns whole-body dynamics from large-scale heterogeneous motion before target-robot training. We curate UniMotion-4K, a motion corpus spanning more than 4K hours from human videos, native 3D motion datasets, and heterogeneous humanoid platforms, and canonicalize these diverse sources into a unified motion space. A language-conditioned Motion Expert is then pretrained to predict future whole-body motion without target-robot action supervision. During robot post-training, the pretrained Motion Expert is integrated with Video and Action Experts through asymmetric Mixture-of-Transformers (MoT) attention, enabling predictive scene dynamics and whole-body motion to jointly inform embodiment-specific action generation. Experiments show that WholeBodyWAM consistently benefits from increased motion-pretraining scale, improves future-motion prediction and downstream task performance, and transfers effectively to real-world humanoid manipulation. Moreover, the pretrained motion prior substantially improves data efficiency under limited target-robot demonstrations.
A Comprehensive Review of Generative Physical Artificial Intelligence
原摘要
The integration of large-scale foundation models with physical embodiments has led to significant advancements in robotics known as Generative Physical Artificial Intelligence (GPAI). These agentic AI systems autonomously perceive, reason, and act in complex real-world situations. This survey comprehensively analyzes GPAI systems, focusing on their architectural foundations, current applications, and key limitations. We introduce a taxonomy of five distinct approaches: Robot Foundation Models (RFMs) for cross-platform skill transfer; Vision-Language Action (VLA) models for end-to-end multi-modal perception and control; Large Behavior Models (LBMs) for human-like movement generation; Diffusion Policy Models (DPMs) for diffusion model-based temporally coherent action generation; and World Foundation Models (WFMs) for physics-compliant simulation and data generation. We examine how these approaches complement each other: WFMs generate training data for VLAs and DPMs, RFMs enable cross-platform deployment of learned policies, while LBMs provide motion priors for natural behavior. Through examples across autonomous vehicles, industrial automation, healthcare robotics, and humanoid systems, we identify significant performance improvements and summarize promising research directions in data-efficient learning, sim-to-real transfer, edge-compatible architectures, and safety frameworks. These insights advance embodied AI for IoT-connected environments where intelligent agents interact with networked sensors, actuators, and edge devices.