Papers for 2026-09-08
10 papers原摘要
Human-robot interaction (HRI) enables intuitive and intelligent collaboration between humans and robots in real-world environments. This paper introduces a humanoid robot prototype designed as a flexible testbed for developing and integrating artificial intelligence (AI) modules in HRI tasks. The system features a 12 degree-of-freedom (DOFs) dual-arm mechanism and a 2 DOFs head with an expressive LCD screen to express facial emotions. All hardware components are controlled by a custom-designed controller board with real-time AI processing supported by an onboard Jetson module. The system incorporates three AI modules: (1) gesture recognition using MediaPipe Pose and an LSTM classifier, (2) object detection with YOLO and 3D localization, and (3) voice-command processing through speech recognition and large language model(LLM)-based semantic parsing. The platform is validated through experiments on positioning accuracy, with results showing average manipulation errors of approximately 1.83 cm. To demonstrate its versatility, experimental results show over 90% task accuracy, with gesture recognition reaching 96%, speech recognition reaching 92%. The results confirm the effectiveness of the proposed system as a reproducible and accessible humanoid platform for research and prototyping in HRI.
Risk and Anomaly Identification for Distribution Network Optimal Operation Based on Reinforcement Learning and Uncertainty Quantification
原摘要
Reliable operation of modern distribution networks requires timely identification of operational risks and anomalous events under pervasive uncertainty. In practice, operators must identify risks that are inherent in stochastic yet in-distribution conditions, and anomalies that correspond to out-of-distribution behaviors such as unusual load patterns, extreme weather or cyber-physical attacks. This paper addresses this joint risk and anomaly identification problem for optimal distribution network operation and proposes a deep reinforcement learning framework that is explicitly uncertainty aware. We integrate distributional and Bayesian deep reinforcement learning to realize a second- order uncertainty quantification scheme that decomposes total uncertainty into aleatoric and epistemic components, which are respectively used to characterize inherent risk and out-of- distribution anomalies. The resulting epistemic estimates drive both exploration during training and out-of-distribution detec- tion with fallback control during deployment, whereas aleatoric estimates are used to characterize intrinsic operational risk. Simulation results demonstrate the performance of our DRL agent and the effectiveness of the uncertainty quantification.
原摘要
Building automation systems generate rich sensor data yet remain insight-poor because heterogeneous point naming, missing metadata, and fragmented documentation obstruct their operational use. This systematic review analyses and codes 66 peer-reviewed studies on large language models (LLMs) for HVAC operations published between 2023 and March 2026. Each study is classified across five application families and three LLM method families and assessed for evidence realism, deployment readiness, and the responsibility boundary between the LLM and physical HVAC decisions. The corpus is concentrated in building energy modelling (BEM, 32 of 66 papers), while load forecasting remains too sparse for subfield-level conclusions. Only four studies reach pilot-level evidence, and none reports sustained operational deployment. No study was classified as ready-now for industry adoption; three were near-term and 63 research-only. Nevertheless, several bounded, human-in-the-loop uses merit near-term trials, including point-name normalisation, document-grounded operator support, BEM workflow assistance, and advisory interfaces around physics-based controllers. Conventional machine learning (ML), model predictive control (MPC), reinforcement learning (RL) and ontology-based tools remain more adopted for high-frequency control, short-horizon numerical forecasting, and well-posed ontology mapping, while autonomous agentic operation and unvalidated occupant proxies remain research-stage. Current evidence therefore supports LLMs primarily as semantic and workflow layers rather than autonomous HVAC controllers. Future work should prioritise field-validated benchmarks, orchestration evaluation under operational constraints, and LLM-MPC/RL architectures with bounded latency and verifiable safety properties.
Human-Human & Human-Robot Interaction Transformer (H2INT) for Robot Navigation in Dense and Uncertain Crowds
原摘要
Safe robot navigation in dense crowds requires reasoning about pedestrian motion and how it may change in response to a robot. However, many learning-based approaches generate pedestrian motion independently of the robot or assume uniform reciprocity, omitting an important source of interaction uncertainty. This paper presents a Human-Human & Human-Robot Interaction Transformer (H2INT), a reinforcement learning framework that retains robot-conditioned changes in pedestrian motion during policy learning while allowing responsiveness to vary across pedestrians. Responsiveness affects the crowd dynamics when the robot is visible but is not supplied as a policy input; the policy must instead infer its consequences from robot-centered relative positions. A two-stage gated Transformer progressively encodes human-human and human-robot relations, while a recurrent policy captures their temporal evolution. A curriculum gradually reduces pedestrian responsiveness to increase interaction difficulty. Simulation experiments demonstrate improved navigation safety and robustness over representative baselines across response conditions and crowd densities, and show transfer without retraining to structurally distinct crowd-flow layouts. Ablations support the hierarchical relational encoding and gated updates. Real-robot deployment further verifies that the learned policy can operate with sparse observations in a physical environment.
A Comparative Study of Graph Representations for GNN-Based Power Grid Control in L2RPN
原摘要
Graph construction is a critical but underexamined design choice in deep reinforcement learning for power grid control. We present a controlled experimental comparison of different graph representations, including physical topology, electrical-sensitivity, and hybrid variants for topology control in the Learning to Run a Power Network (L2RPN) environment. Our findings indicate that matching graph complexity to task granularity is more important than maximizing representational richness, and highlight the importance of controlled representation studies at scale.
OR-Transformer: Scaling Real-Time Decision-Making to 1,000 Items
原摘要
Modern supply chain operations can require coordinating replenishment across thousands of heterogeneous items under correlated stochastic demand, heterogeneous lead times, and shared fixed ordering costs, yielding observation spaces exceeding $10^4$ dimensions. At this scale, rolling-horizon stochastic mixed-integer linear programs (MILPs) become prohibitively slow, while standard reinforcement learning (RL) methods face increasingly challenging credit assignment in high-dimensional action spaces. We introduce OR-Transformer, a deep reinforcement learning framework for joint replenishment under stochastic demand, with an item-permutation-equivariant Transformer architecture and pathwise-gradient training through the inventory dynamics. Across problem sizes up to 1,024 inventory items, OR-Transformer increasingly outperforms learning-based and rolling-horizon MILP baselines as scale grows. It also reduces online decision-making time by over 4 million times relative to MILP solvers, enabling real-time, large-scale deep RL in supply chain operations.
Importance and methods to control, vary, and characterize mud strength for studying locomotion
原摘要
Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.
Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables
原摘要
Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.
WISE: World-model-guided Imagination Scheduling for Efficient Post-training of Vision-Language-Action Models
原摘要
Post-training VLA policies typically rely on supervised fine-tuning with costly expert demonstrations or reinforcement learning with expensive and potentially unstable real-world exploration. World models offer a promising alternative by evaluating candidate behaviors through imagined futures, yet effective post-training requires more than accurate prediction: imagination must be scheduled where it is useful, bounded within reliable horizons, and translated into trustworthy policy supervision. In robotic manipulation, the value of imagination varies substantially across execution stages, while extended rollouts can accumulate prediction errors and introduce unreliable learning signals. We introduce WISE (World-model-guided Imagination Scheduling for Efficient Post-training of Vision-Language-Action Models), a unified framework that coordinates when and how world-model imagination is used during policy refinement. WISE selectively invokes imagination at interaction-relevant states, performs bounded multi-view rollouts, evaluates candidate futures using progress and completion signals, and uses their relative outcomes to refine actions generated from real interaction contexts. Extensive experiments with both $π_0$ and $π_{0.5}$ demonstrate consistent improvements across diverse manipulation tasks while reducing GPU computation time by approximately 80% compared with full imagination. Real-world evaluations further show substantial gains in robustness and generalization under diverse real-world distribution shifts.
EF1-Constrained Nash Social Welfare with Identical Additive Valuations: Complexity, Guarantees, and Experiments
原摘要
We study the allocation of indivisible goods among agents with identical additive valuations, focusing on envy-freeness up to one good (EF1) and Nash social welfare (NSW). Since every maximum-NSW allocation is EF1 under additive valuations, the associated threshold problem inherits the known strong NP-hardness of NSW maximization under identical additive valuations and is strongly NP-complete. We therefore focus on welfare guarantees satisfied by arbitrary EF1 allocations. Although every such allocation is known to achieve an $e^{-1/e}$-approximation to the unrestricted optimal NSW, we identify conditions yielding stronger guarantees. Under uniform valuations, every EF1 allocation is NSW-optimal. Under an $\varepsilon$-small-item condition, every EF1 allocation achieves an explicit approximation ratio $ρ_n(\varepsilon)$ satisfying $ρ_n(\varepsilon) = 1-O(\varepsilon^2)$ as $\varepsilon\to 0$ for fixed $n$. We further consider the stronger sequential requirement that EF1 be maintained after every item assignment. For this setting, we propose \emph{PriorityNet}, a deep reinforcement learning framework trained using Proximal Policy Optimization and equipped with prospective EF1 action masking. The mask restricts every decision to assignments that preserve EF1, thereby guaranteeing prefix-wise EF1 by construction without post-processing repair. Across 3,000 test instances in each of the offline and random-order online regimes ($n\in[2,20]$ and $m\in[5,100]$), PriorityNet attains mean normalized $\operatorname{NSW}$ values of $0.9911$ and $0.9701$, respectively. Relative to offline Longest Processing Time (LPT) and online least-valued-bundle baselines, it achieves instance-wise win-minus-loss rates of $+27.10\%$ and $+17.87\%$, while matching the offline baseline's mean normalized welfare to four decimal places and modestly improving the online mean from $0.9694$ to $0.9701$.