Papers for 2026-10-20
10 papersFCTS: Failure-Guided Curriculum Tree Search Over Generated Terrain for Legged Parkour
原摘要
Quadruped parkour policies handle canonical obstacles well, but their training curricula often miss the irregular, compound geometry of industrial and disaster-response sites, where agile locomotion matters most. Such environments pose a hard generalization problem: even training directly on reconstructed geometry from the target site does not reliably yield policies that traverse it. Hand-designed curricula span only a few terrain families, and recent LLM-generated curricula offer little control over which policy weaknesses they target. We propose FCTS, a failure-conditioned terrain curriculum framework that uses localized traversal failures to automatically generate the terrains a policy should train on next. Each failure's location, termination mode, robot state, and surrounding terrain geometry condition this generation, and Monte Carlo Tree Search explores alternative curriculum trajectories under a fixed training budget. On terrains built from scanned real-world construction sites, FCTS raises success rate from 28.4% to 85.8% on a medium-difficulty course and from 14.9% to 44.7% on a hard course relative to the strongest parkour or LLM-curriculum baselines, and maintains higher progress on extreme terrains where full traversal is rare. Hardware experiments on a quadruped robot confirm that the learned FCTS policies transfer to the real world.
BeJEPA: A Goal-Conditioned Humanoid Behavior World Model via Unsupervised RL
原摘要
Humanoid control requires coordinating whole-body posture with position and heading in the world frame. Mainstream controllers imitate trajectories in the root frame, but struggle to regain the target world pose after displacement. We introduce BeJEPA, a goal-conditioned Behavior World Model learned through unsupervised reinforcement learning from human motion priors and robot interaction. BeJEPA learns a shared representation of body configuration and world placement through a joint-embedding predictive architecture (JEPA). A Dynamic Predictor predicts the next state embedding under an action, while a Successor Predictor summarizes a goal-conditioned policy's expected discounted future state embeddings in a single vector. During joint training, Dynamic grounds the initial representation in observed physical transitions, while Successor increasingly organizes it around long-term behavior. Their composition guides policy improvement through one physical prediction and one behavioral summary, without long imagined rollouts. In 20-second motion-tracking experiments, BeJEPA with online action refinement using Dynamic outperforms all evaluated baselines in global body-position error, reducing it on AMASS by 61.7% relative to BFM-Zero with world-pose inputs and 58.7% relative to SONIC. Physical deployment on a Unitree G1 demonstrates joint attainment of posture, world position, and heading goals, recovery from the ground, and closed-loop return after disturbances and goal changes. Project page: https://ylyem9x.github.io/BeJEPA-project.
Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator
原摘要
Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.
CoEvolve: Self-Evolving Code Policies from Skills to Strategies for Humanoid Robots
原摘要
Recent advances in Vision-Language-Action (VLA) models and World Action Models (WAMs) have expanded the manipulation and whole body capabilities of individual robots. Yet a single robot remains limited by its embodiment, and many real world tasks require capabilities that can only emerge through cooperation. Existing multi robot frameworks largely emphasize task decomposition, allocation, and replanning, while providing limited support for adapting executable coordination when physical execution deviates from the intended behavior. We present CoEvolve, a framework that represents team coordination as executable code over fixed robot motor skills. CoEvolve introduces Verifier Guided Coordination Evolution, where a multimodal foundation model instantiates coordination strategies through motion primitives, semantic objectives, temporary robot roles, and bounded execution parameters. Physical verification evaluates each executed transition, rejected behaviors trigger structured coordination revision from an accepted checkpoint, and verified experience is retained to guide subsequent decisions. We evaluate CoEvolve with two simulated Unitree G1 humanoids transporting a freely supported rigid payload through constrained corridors. Across 15 base task runs with three multimodal backbone families, CoEvolve completes 8 tasks, with every backbone achieving end to end success. Additional evaluations yield verified placement on two additional corridor layouts and after both same-backbone and cross-backbone experience initialization, while exposing persistent limitations in motion precision and contact stability. These results support executable coordination as a practical interface for adapting long horizon multi robot collaboration under shared physical constraints.
Blind Precise Assembly: Proprioceptive Sim-to-Real Peg-in-Hole for Diverse Parts
原摘要
Every robot already carries high-resolution contact sensors: its own joints. Legged robots and humanoids exploit them to walk, run, and track whole-body motions without vision, but there the contacts are large and forceful. Is joint sensing also enough for precise, contact-rich assembly, where the robot must find a millimeter-scale opening, mesh gear teeth, or catch a thread through light contact? We study this question by training blind assembly policies that observe only a short history of joint positions, velocities, and their own actions, without visual, force, torque, or tactile sensing. The poses of both the fixture and the part are unknown to the policy, and the grasp is randomized substantially. The policy must therefore assemble the parts through contact, sensed exclusively through its own proprioception. Trained with reinforcement learning entirely in simulation over randomized parts, grasps, and contacts, such policies learn peg insertion, gear meshing, and nut threading. The peg insertion policy transfers zero-shot to the real world and inserts pegs of different shapes and sizes in 73% of trials. Controlled comparisons with matched visual policies in simulation show that blind policies generalize far better to unseen part shapes and sizes, though they can be slower. Training such policies needs thousands of different assemblies, each simulated with its clearance intact, so we also release an open-source generator that builds them procedurally from exact convex pieces for MuJoCo; it is more accurate and faster than convex decomposition or MuJoCo's signed-distance collision. Videos and interactive simulations are at https://younghyopark.me/blind-proprioceptive-assembly/.
Embodiment-Classifier Guidance: Transferring Frozen VLAs Across Robot Dynamics without Demonstrations
原摘要
Flow-based policies such as $\pi_0$ are trained on a fixed set of embodiments, and transferring them to new ones is an open problem. To adapt a frozen $\pi_0$ to a new embodiment without additional demonstrations or parameter updates, we train a lightweight embodiment classifier to distinguish successful action chunks on the source body from those on the target body, using a few calibration tasks. On transfer tasks that $\pi_0$ saw on its source body but the classifier was never trained on, we nudge each denoising step of $\pi_0$ with the classifier's gradient, which estimates the direction from the distribution of successful actions on the source body toward that on the target body. On the LIBERO simulation benchmark with four modified controllers, embodiment-classifier guidance raises $\pi_0$'s average success on the target bodies from 72% to 80% across 12 suite-controller pairs, with a 31% relative reduction in failures (11 of 12 gain; 5 significant after Holm correction). In simulation, guidance is data-efficient, needing few target-body rollouts per task, which makes it promising for sim-to-real transfer, where rollouts are costly. Guidance is mixed on weak wrists and harmful on a locked wrist, when the classifier lacks data or favors infeasible motions. Collecting more target-body data with guided $\pi_0$ can fill such gaps: on one weak-wrist arm, guided $\pi_0$ solved a task on which unguided $\pi_0$ had zero successes in the original data, and retraining the classifier on the guided successes raised success from 52.5% to 70.7%.
Hardware-as-Regularization: Enhancing Data Consistency in Imitation Learning via an Adjustable Passive Compliant Leader Arm
原摘要
Low-cost passive leader arms enable scalable data collection for imitation learning, but their lack of restoring forces leaves redundant joints unconstrained, yielding highly inconsistent joint-space trajectories. We address this with a low-cost passive joint module (an adjustable mechanical clutch and a 3D-printed spiral spring) that pulls each joint toward a user-defined neutral posture. This passive restoring force acts as a physical prior equivalent to joint-space $L_2$ regularization (``Hardware-as-Regularization''), improving kinematic consistency with shorter completion time than an unregularized arm and preserved movement smoothness. Experiments show substantial variance reduction over a naive passive arm, trajectory consistency on par with an active virtual spring of the same actuator class, and substantially higher downstream success rates (e.g., 73.3% vs. 36.7% on Block Stacking); a stiffness sweep shows consistency degrading monotonically as stiffness decreases, confirming that mechanical stiffness behaves like a regularization weight.
No Eyes, No Problem: What Does Touch Contribute to Blind Baoding Ball Manipulation?
原摘要
Humans manipulate objects within their hands through touch alone with remarkable ease, but for robots, achieving sustained real-world manipulation without vision remains an open challenge. Although reinforcement learning (RL) can generate sophisticated blind manipulation policies in simulation, transferring them to a real dexterous hand remains hindered by continuously changing contacts, motion-induced tactile information drift, and the gap between simulated and physical dynamics. We study this problem through Baoding ball rotation on the Shadow Dexterous Hand Lite, using only proprioception and binary tactile feedback as observations. We achieve successful zero-shot transfer through a combination of a sensor-aligned, coupling-aware embodiment in simulation, tactile calibration, and two novel episodic domain randomisations: slew-rate action limits and STuck-AT Taxels. On the physical hand, the policy achieves sustained blind Baoding rotation, completing 225 consecutive $\mathbf{180^\circ}$ rotations (112.5 full rotations) at $\sim0.36 \;\text{rot/s}$ in a single continuous trial without any vision or object-state information. Furthermore, we evaluate the contribution of tactile sensing relative to proprioception alone and identify the hand regions where tactile information is most important. This is the strongest reported hardware result for Baoding ball manipulation in both rotation count and speed, irrespective of the sensing modality used. By effectively bridging the sim-to-real gap, our framework sets a new benchmark for sustained tactile-driven dexterous manipulation on physical hardware.
ORD-WM: Learning Object-Centric Rigid Dynamics for 3D World Modeling in Robotic Manipulation
原摘要
World models provide robots with a predictive mechanism for reasoning about how actions change object states in manipulation tasks. However, existing image-based and dense 3D world models do not explicitly impose object-level rigid motion, leaving rigid-object geometry preservation to be learned implicitly and making multi-step rollouts susceptible to shape drift or object-level motion inconsistency. To address this, we propose ORD-WM, a 3D world model that learns object-centric rigid dynamics for robotic manipulation. ORD-WM learns a vector-neuron variational autoencoder supervised by signed distance fields, which encodes each object point cloud as a geometry-aware latent representation composed of 3D vector features, and uses an action-conditioned dynamics model to predict object-wise SE(3) motion increments. Rather than generating unconstrained next latent states, ORD-WM analytically applies predicted object-wise rigid transformations to the current latent states, separating persistent object geometry from pose changes. Experiments show that ORD-WM enables stable, geometry-preserving multi-step prediction and supports efficient real-time replanning for closed-loop model predictive control in simulated and real-world manipulation scenarios.
Scaling Online Exploration for Robot Agents
原摘要
Robot learning has advanced by scaling demonstration datasets and model capacity; however, deploying a new robot embodiment or task typically necessitates a dedicated teleoperation corpus. The resulting policies remain bounded by their imitation distributions, limiting generalization and continual self-improvement. We introduce RAX (Robot Agent eXploration), an open-source framework for robot agents centered on scaling exploration: enabling agents to improve by acquiring online experience and synthesizing executable programs. In RAX, a general-purpose coding agent generates robot control code, operating without action demonstration data, hand-engineered action primitives, or value-function guidance. Through online exploration, the agent identifies decision sequences that achieve task goals and compiles them into modular programs encapsulating the full perception-planning-control loop. Using RAX, we present a systematic multi-embodiment study on scaling online exploration across precision and long-horizon manipulation tasks using single-arm, bimanual, dexterous, mobile, and humanoid systems in simulation and on real robots. Generalization performance on unseen environments improves consistently as exploration scales. In simulation, RAX outperforms top baseline models by +37.4% on average. On real robots, RAX autonomously learns memory-dependent, articulated, high-precision, deformable, and long-horizon mobile manipulation tasks without human demonstrations, continually improving performance by composing verified skills from prior exploration sessions. As exploration scales, we observe emergent capabilities including active perception, error recovery, safety guardrails, and human-robot collaboration. We open-source RAX as a generalist robot-agent platform in which new robot embodiments are integrated through their APIs alone, without teleoperated data collection or policy training.