Trials cyclists and mountain bike riders can hop, jump, balance, and drive on one or both wheels. This versatility allows them to achieve speed and energy-efficiency on smooth terrain and agility over rough terrain. Inspired by these athletes, we present the design and control of a robotic platform, Ultra Mobility Vehicle (UMV), which combines a bicycle and a reaction mass to move dynamically with minimal actuated degrees of freedom. We employ a simulation-driven design optimization process to synthesize a spatial linkage topology with a focus on vertical jump height and momentum-based balancing on a single wheel contact. Using a constrained Reinforcement Learning (RL) framework, we demonstrate zero-shot transfer of diverse athletic behaviors, including track-stands, jumps, wheelies, rear wheel hopping, and front flips. This 23.5 kg robot is capable of high speeds (8 m/s) and jumping on and over large obstacles (1 m tall, or 130% of the robot's nominal height).

Whole-body mobile manipulation is a fundamental capability for general-purpose robotic agents, requiring both coordinated control of the mobile base and manipulator and robust perception under dynamically changing viewpoints. However, existing approaches face two key challenges: strong coupling between base and arm actions complicates whole-body control optimization, and perceptual attention is often poorly allocated as viewpoints shift during mobile manipulation. We propose InCoM, an intent-driven perception and structured coordination framework for whole-body mobile manipulation. InCoM infers latent motion intent to dynamically reweight multi-scale perceptual features, enabling stage-adaptive allocation of perceptual attention. To support robust cross-modal perception, InCoM further incorporates a geometric-semantic structured alignment mechanism that enhances multimodal correspondence. On the control side, we design a decoupled coordinated flow matching action decoder that explicitly models coordinated base-arm action generation, alleviating optimization difficulties caused by control coupling. Without access to privileged perceptual information, InCoM outperforms state-of-the-art methods on three ManiSkill-HAB scenarios by 28.2%, 26.1%, and 23.6% in success rate, demonstrating strong effectiveness for whole-body mobile manipulation.

This work presents a wearable human activity recognition (HAR) system that performs real-time inference directly inside a shank-mounted inertial measurement unit (IMU) to support low-latency control of a lower-limb exoskeleton. Unlike conventional approaches that continuously stream raw inertial data to a microcontroller for classification, the proposed system executes activity recognition at the sensor level using the embedded Machine Learning Core (MLC) of the STMicroelectronics LSM6DSV16X IMU, allowing the host microcontroller to remain in a low-power state and read only the recognized activity label from IMU registers. While the system generalizes to multiple human activities, this paper focuses on three representative locomotion modes - stance, level walking, and stair ascent - using data collected from adult participants. A lightweight decision-tree model was configured and deployed for on-sensor execution using ST MEMS Studio, enabling continuous operation without custom machine learning code on the microcontroller. During operation, the IMU asserts an interrupt when motion or a new classification is detected; the microcontroller wakes, reads the MLC output registers, and forwards the inferred mode to the exoskeleton controller. This interrupt-driven, on-sensor inference architecture reduces computation and communication overhead while preserving battery energy and improving robustness in distinguishing level walking from stair ascent for torque-assist control.

Autonomous robots can transform how we observe marine ecosystems, but close-range operation in reefs and other cluttered habitats remains difficult. Vehicles must maneuver safely near animals and fragile structures while coping with currents, variable illumination and limited sensing. Previous approaches simplify these problems by leveraging soft materials and bioinspired swimming designs, but such platforms remain limited in terms of deployable autonomy. Here we present a sea turtle-inspired autonomous underwater robot that closed the gap between bioinspired locomotion and field-ready autonomy through a tightly integrated, vision-driven control stack. The robot combines robust depth-heading stabilization with obstacle avoidance and target-centric control, enabling it to track and interact with moving objects in complex terrain. We validate the robot in controlled pool experiments and in a live coral reef exhibit at the New England Aquarium, demonstrating stable operation and reliable tracking of fast-moving marine animals and human divers. To the best of our knowledge, this is the first integrated biomimetic robotic system, combining novel hardware, control, and field experiments, deployed to track and monitor real marine animals in their natural environment. During off-tether experiments, we demonstrate safe navigation around obstacles (91\% success rate in the aquarium exhibit) and introduce a low-compute onboard tracking mode. Together, these results establish a practical route toward soft-rigid hybrid, bioinspired underwater robots capable of minimally disruptive exploration and close-range monitoring in sensitive ecosystems.

Agentic artificial intelligence (AI) is emerging as a key enabler for autonomous radio access networks (RANs), where multiple large language model (LLM)-based agents reason and collaborate to achieve operator-defined intents. The open RAN (O-RAN) architecture enables the deployment and coordination of such agents. However, most existing works consider simple intents handled by independent agents, while complex intents that require coordination among agents remain unexplored. In this paper, we propose an agentic AI framework for intent translation and optimization in cell-free O-RAN. A supervisor agent translates the operator intents into an optimization objective and minimum rate requirements. Based on this information, a user weighting agent retrieves relevant prior experience from a memory module to determine the user priority weights for precoding. If the intent includes an energy-saving objective, then an open radio unit (O-RU) management agent will also be activated to determine the set of active O-RUs by using a deep reinforcement learning (DRL) algorithm. A monitoring agent measures and monitors the user data rates and coordinates with other agents to guarantee the minimum rate requirements are satisfied. To enhance scalability, we adopt a parameter-efficient fine-tuning (PEFT) method that enables the same underlying LLM to be used for different agents. Simulation results show that the proposed agentic AI framework reduces the number of active O-RUs by 41.93% when compared with three baseline schemes in energy-saving mode. Using the PEFT method, the proposed framework reduces the memory usage by 92% when compared with deploying separate LLM agents.

This paper focuses on enhancing the grasping precision and generalization of manipulation policies learned via imitation learning. Diffusion-based policy learning methods have recently become the mainstream approach for robotic manipulation tasks. As grasping is a critical subtask in manipulation, the ability of imitation-learned policies to execute precise and generalizable grasps merits particular attention. Existing imitation learning techniques for grasping often suffer from imprecise grasp executions, limited spatial generalization, and poor object generalization. To address these challenges, we incorporate grasp prior knowledge into the diffusion policy framework. In particular, we employ a latent diffusion policy to guide action chunk decoding with grasp pose prior, ensuring that generated motion trajectories adhere closely to feasible grasp configurations. Furthermore, we introduce a self-supervised reconstruction objective during diffusion to embed the graspness prior: at each reverse diffusion step, we reconstruct wrist-camera images back-projected the graspness from the intermediate representations. Both simulation and real robot experiments demonstrate that our approach significantly outperforms baseline methods and exhibits strong dynamic grasping capabilities.

Generating realistic talking-head videos remains challenging due to persistent issues such as imperfect lip synchronization, unnatural motion, and evaluation metrics that correlate poorly with human perception. We propose FlowPortrait, a reinforcement-learning framework for audio-driven portrait animation built on a multimodal backbone for autoregressive audio-to-video generation. FlowPortrait introduces a human-aligned evaluation system based on Multimodal Large Language Models (MLLMs) to assess lip-sync accuracy, expressiveness, and motion quality. These signals are combined with perceptual and temporal consistency regularizers to form a stable composite reward, which is used to post-train the generator via Group Relative Policy Optimization (GRPO). Extensive experiments, including both automatic evaluations and human preference studies, demonstrate that FlowPortrait consistently produces higher-quality talking-head videos, highlighting the effectiveness of reinforcement learning for portrait animation.

Standard vision-language-action (VLA) models rely on fitting statistical data priors, limiting their robust understanding of underlying physical dynamics. Reinforcement learning enhances physical grounding through exploration yet typically relies on external reward signals that remain isolated from the agent's internal states. World action models have emerged as a promising paradigm that integrates imagination and control to enable predictive planning. However, they rely on implicit context modeling, lacking explicit mechanisms for self-improvement. To solve these problems, we propose Self-Correcting VLA (SC-VLA), which achieve self-improvement by intrinsically guiding action refinement through sparse imagination. We first design sparse world imagination by integrating auxiliary predictive heads to forecast current task progress and future trajectory trends, thereby constraining the policy to encode short-term physical evolution. Then we introduce the online action refinement module to reshape progress-dependent dense rewards, adjusting trajectory orientation based on the predicted sparse future states. Evaluations on challenging robot manipulation tasks from simulation benchmarks and real-world settings demonstrate that SC-VLA achieve state-of-the-art performance, yielding the highest task throughput with 16% fewer steps and a 9% higher success rate than the best-performing baselines, alongside a 14% gain in real-world experiments. Code is available at https://github.com/Kisaragi0/SC-VLA.