Developing deployable locomotion policies through conventional reinforcement learning often requires complex reward engineering and expensive training times. While differentiable simulation offers a highly efficient alternative, open-source tools capable of end-to-end transfer of these policies to physical hardware remain limited. This paper introduces Open-DiffLoco, an open-source framework for training deployable blind quadruped locomotion policies with differentiable simulation. The framework implements the Short-Horizon Actor-Critic (SHAC) algorithm in MuJoCo XLA (MJX) and trains a proprioceptive policy that transfers to real-world hardware. The deployed policy removes privileged actor observations, including base linear velocity, and does not rely on reference trajectories. It also uses a substantially simplified reward function, enabling the robot to discover walking patterns without the complex auxiliary rewards typically used in conventional reinforcement learning pipelines. When deployed on physical hardware (a Unitree Go2 quadruped), the trained policy tracks omnidirectional velocity commands with root-mean-square error below 0.2 m/s, reaches speeds above 1 m/s, and remains robust to uneven terrain and external physical disturbances, such as lateral pushes. Across the reported configurations, training uses under 6 GB of VRAM on a single NVIDIA GeForce RTX 5080 GPU and completes in approximately 20-60 minutes. As an algorithmic extension to SHAC, we propose Jacobian-Augmented Value Estimation (JAVE), which supervises the critic Jacobians to improve early first-order policy-gradient training. To our knowledge, Open-DiffLoco is the first open-source framework for training deployable locomotion policies using differentiable simulation. Deployment videos and source code are available at: https://diffloco.martin-opat.com/

Humanoid robots, with their human-like shape and multi-tasking capabilities, are well-aligned with human-dominated workplaces, like those in civil and construction engineering, where they could collaborate with human workers or autonomously perform physically demanding and hazardous tasks. Despite this promise, limited research has explored how to endow these robots with the practical capabilities needed to perform construction tasks. To this end, this study proposes a novel perception-and-action system that enables humanoid robots to learn and perform construction tasks from worker demonstrations. This system contains two deep networks: Humanoid-PoseNet, which extracts human postures and translates them into mechanically feasible poses for a humanoid robot; and Humanoid-ActionNet, which learns robot-executable actions based on these translated poses. Experimental results demonstrate that the humanoid robot reliably executed eight construction-related actions, achieving an average motion-tracking error of 82.45 mm MPJPE (Mean Per Joint Position Error). This work provides an early step toward deploying humanoid collaborators in construction.

Humanoid teleoperation for demonstration collection requires coordinated whole-body motion, continuous dexterous hand control, and viewpoint control. Existing systems either simplify hand commands or depend on dedicated wearable sensors for fine-grained hand motion. We introduce Teleopit, a full-embodiment teleoperation system that maps body, hand, and head signals from VR to a humanoid body, configurable dexterous hands, and a 2-DoF active vision module. A history encoder and failure-aware rewind sampling improve the motion tracker on both motion-capture and live VR references. An optimization-based hand retargeter combines normalized finger directions, fingertip closure, and thumb-frame alignment to map human hand motion to different dexterous hands without tuning hand-specific objective or solver hyperparameters. Component experiments evaluate tracking success rate and retargeting behavior, while real-robot teleoperation demonstrates coordinated locomotion, manipulation, and viewpoint control. ACT and GR00T N1.7 policies trained on 96 successful demonstrations collected with Teleopit achieve task success rates of 90.0% and 95.0%, respectively, when deployed on the humanoid. The project page is available at https://botrunner64.github.io/teleopit-page.

Humans readily adapt their movements as their bodies change through aging, injury, or load carrying, but learning-based robot policies often break when hardware properties shift. We introduce an online embodiment adaptation framework for quadrupedal locomotion that infers embodiment parameters from short interaction histories and conditions control on the inferred hardware state. Our method pairs a generalist policy trained under embodiment randomization with a lightweight adaptation module that identifies physical changes within half a second. We evaluate two representative forms of embodiment variation: joint-range constraints and trunk-mass changes, corresponding to joint-level kinematic degradation and body-level dynamic variation. In simulation, the module accurately estimates these changes and enables closed-loop control that substantially outperforms policies conditioned directly on interaction history. On a real Unitree Go2 robot, our system maintains stable locomotion under severe instances of the evaluated changes, including a fully locked leg and a 5 kg payload, where non-adaptive methods fail. These results demonstrate the practicality of explicit online embodiment identification for rapid adaptation to joint-limit and payload-mass changes, and provide a step toward handling broader forms of uncertain, degraded, or changing robot hardware.

Bicycle robots are fast and energy efficient, but their simple mechanical design and their underactuated and non-holonomic dynamics make highly agile maneuvers difficult to achieve. Here, we use Reinforcement Learning (RL) to enable a bicycle robot to learn and compose a diverse repertoire of dynamic acrobatic stunts. Using different RL formulations such as waypoint following, pose reaching, twist tracking, guided tracking, and motion imitation, the robot acquires autonomous single and multi-table forward and lateral jumps, steerable jumps, front flips, kip-ups, kip-downs, driving, wheelies, bunny hops, and three-point turns. To coordinate these behaviors, we introduce an orchestrator that transitions between policies using state-dependent triggers, enabling robust long-horizon acrobatic stunts. We validate the approach on the Ultra Mobility Vehicle (UMV), a custom bicycle robot, in simulation and hardware. The robot repeatedly traverses tables up to 1 m high, performs more than 15 consecutive autonomous jumps while following waypoints, handles previously unseen multi-table configurations, executes continuous repertoires of kipups, jumps, flips, kip-downs, over more than 20 consecutive trials, and performs more than 10 consecutive autonomous and steerable repertoires of wheelies, lateral jumps, and single-wheel jump downs. These results demonstrate that RL can endow bicycle robots with levels of agility previously associated primarily with legged platforms while preserving the speed and efficiency of wheeled locomotion, establishing a foundation for bicycle acrobatics.