Reinforcement learning (RL) enables the synthesis of control policies directly from data, making it highly appealing for complex cyber-physical systems (CPSs) and robotics. A persistent challenge, however, is ensuring strict, hard safety constraints during the active learning phase. In real-world physical systems, violating mechanical limits can cause irreversible damage, necessitating that exploration remains strictly within safe operational regions. We propose a generalized framework that combines the adaptive, high-performance nature of deep reinforcement learning (DRL) with the formal safety guarantees of model predictive control (MPC). Using a mathematical model of the system dynamics, offline MPC computations define a feasible state-action space, representing all safe combinations of system states and control inputs that guarantee constraint satisfaction. During training and deployment, the RL agent's instantaneous actions are projected onto this globally verified feasible set via a safety filter. We systematically evaluate our generalized approach on a non-linear 1-DoF laboratory testbed, demonstrating successful exploration and stable policy convergence on physical hardware.

Sim-to-real transfer in robot learning is often limited by discrepancies between the ideal actuator dynamics assumed during policy training and the nonlinear, hardware-dependent behavior of physical motors. While conventional approaches attempt to bridge this gap by increasing simulator fidelity through system identification, domain randomization, or learned actuator models, we introduce an alternative paradigm: actuator reality shaping. Instead of modifying the simulator to match the real world, our method shapes the closed-loop behavior of physical actuators to match the idealized second-order reference dynamics used in simulation. By equipping each joint with a two-degree-of-freedom feedforward--feedback controller, we decouple reference-response shaping from robust stabilization, thereby providing a standardized actuator interface for reinforcement learning policies. As a result, policies trained only with the prescribed reference model can be deployed zero-shot on real hardware without task-level fine-tuning or learned actuator models. We validate the approach on a single-joint high-gear-ratio servo under external loads and a 7-DOF robotic arm reaching task, where actuator reality shaping substantially reduces sim-to-real tracking error and improves zero-shot task performance compared with standard servo-control and representative real-to-sim-to-real baselines. We further demonstrate zero-shot transfer on a wheeled-legged robot driving over a slope and a humanoid robot walking, suggesting that actuator reality shaping can serve as a reusable interface for robot learning across diverse hardware platforms. Project page: https://syamamori.github.io/ActuatorRealityShaping.github.io/

Real-world learning for dexterous hands remains brittle because high-dimensional hand actions amplify imitation errors and make reinforcement-learning exploration prone to contact-breaking motion. While combining imitation learning (IL) with online reinforcement learning (RL) can reduce manual supervision, unconstrained exploration in raw hand-action spaces is sample-inefficient and risky for physical hardware. We introduce a latent motion prior module (\prior{}) that maps recent hand-action histories to a compact, history-conditioned latent prior and decodes continuous latent commands into executable high-dimensional hand targets. Built on this prior, \method{} is a three-stage real-world dexterous learning framework: it pretrains \prior{} from demonstrations, trains a visuomotor policy that predicts native arm commands and latent hand-action offsets, and improves the policy with online residual RL in the same latent hand-action space. This shared, decodable interface lets residual exploration make local corrections near demonstrated, contact-consistent hand motions rather than perturbing every finger joint independently. We evaluate \method{} on four real-robot dexterous manipulation tasks against raw, linear, and discrete hand-action interfaces. Starting from small task-specific demonstration sets, \method{} achieves a 56.25\% average IL success rate and raises it to 98.75\% after online RL, reaching 100\% final success on three tasks and 95\% on the remaining task.

Robotic throwing enables fast and efficient object placement beyond the robot's immediate workspace, but reliable throwing in cluttered environments remains underexplored. Existing approaches, such as TossingBot, learn throwing strategies from visual input but assume obstacle-free settings. In this paper, we address the problem of throwing objects into a target basket while avoiding obstacles placed randomly in the scene. We introduce a potential field state representation that compactly encodes both basket attraction and obstacle repulsion on a fixed-size grid, enabling reinforcement learning (RL) policies to generalize across arbitrary numbers and configurations of obstacles. The policy is initialized from kinesthetic demonstrations and optimized in simulation using three state-of-the-art RL algorithms (SAC, DDPG, TD3). Among these, SAC achieves the most consistent performance across scenarios. We compare the potential field representation against explicit state encodings and demonstrate that it achieves higher success rates and better scalability to unseen obstacle configurations. Real-robot experiments with unseen throwable objects confirm robust sim-to-real transfer, achieving up to $90\%$ success in cluttered scenes. These results demonstrate that PFR provides a practical and robust representation for safe and efficient robotic throwing in unstructured environments. A video showcasing our experiments is available at: https://youtu.be/ZZnJf8ua2dE

Robot imitation learning for manipulation should preserve demonstrated task geometry while producing dynamically admissible robot motions. Existing pipelines often learn task-dependent trajectories and impose execution limits afterward through filtering, smoothing, clipping, or time scaling, which may distort task-critical end-effector paths. We propose the Spectral Movement Primitive (SMP), a frequency-domain imitation learning framework that couples task-space skill generation with joint-space execution regulation. Demonstrations are represented by truncated finite-horizon Fourier coefficients. An empirically selected low-frequency task band captures the dominant motion geometry, while higher harmonics contribute disproportionately to derivative growth. A frame-aware context-conditioned GMM/GMR prior predicts the task-band coefficients in a canonical task frame, and the resulting Cartesian trajectory is mapped to joint space through sequential inverse kinematics. A phase-coupled regulator then limits the requested phase progression without modifying the spectral coefficients, thereby enforcing joint velocity and acceleration limits while preserving the represented path. Experiments evaluate task-band reconstruction, robustness to composite demonstration corruption, out-of-distribution cross-board generalization, joint-space dynamic admissibility, end-effector path preservation, and deployment on a Franka Panda robot. Results show compact geometric reconstruction, consistent transfer across unseen task frames, substantial reductions in dynamic violations and jerk, and preservation of the intended end-effector path during phase regulation.

Retargeting human object interaction demonstrations to physics based simulation requires reproducing not only body motion but also the object motion and contacts that make manipulation succeed. However, position only hand trajectories do not specify the contact forces needed to manipulate objects, and directly tracking them can overconstrain contact rich finger behavior. We introduce WristMimic, a wrist guided whole body control framework that explicitly separates contact free body motion from contact rich hand manipulation. The contact free body and wrist are guided by kinematic pose targets, whereas the fingers are not directly supervised by human hand pose. Instead, they learn grasping and manipulation behaviors from object tracking and contact outcomes. Our key insight is that the wrist is the natural gate between these two regimes. It is largely free from contact and can be tracked kinematically, yet it determines the global hand configuration and places the fingers within reachable grasp affordances. To ensure reliable wrist placement during interaction, we introduce wrist specific reset constraints and reward prioritization. Experiments show that WristMimic matches or surpasses methods using full finger pose supervision while enabling finger agnostic retargeting across diverse hand embodiments.

In dual-arm dexterous teleoperation, cross-platform generalization of motion retargeting and interactivity of grasping are crucial. However, the heterogeneity of robotic architectures and the wide variety of grasping objects pose significant challenges to achieving precise motion retargeting and compliant grasping in dual-arm dexterous teleoperation. To address these challenges, a dual-arm dexterous teleoperation system (DexTele) is proposed based on motion retargeting and adaptive force control. First, a vision-based motion retargeting module is designed to generate preliminary robot motions from human images. In this module, a motion-graph encoder and latent optimization are proposed for precise and convenient cross-platform motion retargeting. Second, an adaptive grasping module is designed to achieve compliant grasping. This module combines a vision-language model (VLM) with model predictive control (MPC), allowing the system to predict the required grasping force for a target object and perform gradient-based online optimization. Finally, extensive experiments demonstrate that the DexTele achieves precise motion retargeting and compliant grasping with generalization across multiple robot platforms.