Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.

Differentiable predictive control (DPC), a self-supervised learning approach for approximating explicit model predictive control (MPC) policies, offers significant computational advantages over online optimization-based MPC. However, feasibility guarantees, a core requirement for safe control, are currently provided either probabilistically or via online safety filters. The lack of rigorous feasibility guarantees for offline policy optimization remains an open problem. This paper establishes deterministic feasibility guarantees for DPC using a novel topological analysis of the induced reachable safe set, without requiring online safety filters. By exploiting the inherent model-based nature of DPC, in which differentiable system dynamics are embedded directly into the computational graph, we analyze the properties of the learned control policies and the corresponding system states from topological and geometric perspectives. Inspired by our theoretical analysis, we propose a novel self-supervised offline policy learning strategy that utilizes a proxy loss with Control Barrier Functions (CBFs). Crucially, these properties not only significantly improve policy training but also enable the derivation of strict, deterministic feasibility guarantees from a finite number of training samples. Extensive closed-loop simulations validate our theoretical findings, demonstrating that the empirical constraint violations monotonically decrease to zero as the training sample size increases. Ultimately, this work illustrates that DPC policy optimization yields formal safety certificates that are structurally unattainable with conventional black-box methods, e.g., reinforcement learning (RL) or supervised learning-based approximate MPC, thereby providing a new perspective on feasibility guarantees in learning-based control.

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

Zero-shot object-goal navigation (ZSON) in open-vocabulary scenarios is challenging, as it requires a robot to locate an arbitrarily specified object in an unseen environment without task-specific training. Currently, the task still suffers from high latency and limited accuracy due to redundant perception pipelines and insufficient evidence for reliable target confirmation. In this letter, we reframe ZSON as an evidence-driven perception-to-decision problem and present AECNav, a training-free pipeline built on three components: i) Evidence-gated perception, which utilizes a shared encoding across all reasoning stages to establish a unified semantic basis and eliminate redundant computations; ii) Evidence consolidation, which aggregates detections into cluster-level log-odds beliefs. This explicitly separates genuine target support from the false confidence of visually similar distractors, while treating the absence of expected detections as negative evidence; and iii) Active evidence acquisition, which sustains productive exploration under weak semantic cues by selecting frontiers that maximize information gain at minimal traversal cost. As a result, AECNav significantly outperforms previous methods and achieves state-of-the-art success rates of 84.7%, 57.3%, and 51.3% on HM3D-v2, HM3D-OVON, and MP3D, respectively, with substantially lower inference overhead, and attains 95% success across 40 trials on a physical quadruped robot at roughly 5Hz. Code will be made publicly available upon acceptance.

Sparse, delayed, and weakly informative rewards remain central obstacles to efficient reinforcement learning. Reward shaping addresses these limitations by supplementing the task reward with an auxiliary signal that can accelerate learning while, in the classical setting, the original objective remains the evaluation criterion. Established theory guarantees safety for fixed shaping signals: potential-based reward shaping preserves optimal policies when the auxiliary term is the discounted difference of a time-invariant potential. In contemporary reinforcement learning systems, however, both the learner and the information available for guidance evolve during training: value estimates improve, novelty diminishes, feedback shifts, and predictive models are refined. Adaptive reward mechanisms occur across exploration, Bayesian inference, human-in-the-loop learning, automated reward design, and foundation-model-based approaches. This study introduces a unified analytical framework for comparing dynamic reward shaping and neighbouring adaptive reward mechanisms. The proposed framework distinguishes parametric revision from state-dependent variation, separates additive shaping from reward replacement and reward-adjacent guidance, and organises existing methods along temporal, informational, and theoretical dimensions. Using this framework, twelve method families are comparatively analysed. The framework further highlights the conditions under which optimality guarantees survive contemporary deep reinforcement learning pipelines, replay buffers, bootstrapped critics, and reward normalisation, while exposing the unresolved relationship between adaptation rate and learner stability.

Integrating wave energy converters (WECs) with floating offshore wind turbines (FOWTs), to form hybrid wind-wave energy (HWWE) systems, is a promising approach to achieve further cost reduction for offshore renewable energy. In such systems, the control of the integrated WECs plays an important role, with the potential to generate additional wave energy while simultaneously suppressing floating platform motion. However, HWWE systems are characterized by complex dynamics, making accurate modelling only viable through numerical simulation, and posing significant challenges for control design. This paper proposes a reinforcement learning (RL) control framework for HWWE systems, in which the real-time control policy is learned directly through interactions with high-fidelity simulation. A numerical model is established for a HWWE system consisting of an IEA 15 MW wind turbine, a VolturnUS semi-submersible platform, and three torus-type WECs, which is then employed as the RL training environment. Control performance is evaluated in terms of both wave energy generation and platform motion reduction, two competing objectives, from a Pareto perspective. It is shown that the proposed RL controller achieves substantial Pareto improvements over conventional control strategies, e.g., over 75\% higher wave energy capture at the same platform motion level, or nearly 50\% lower motion at the same energy capture level, thereby significantly extending the attainable performance boundary of HWWE systems.

Voice-guided teleoperation requires systems that adapt to the evolving dynamics of human guidance. Yet most voice-controlled robot systems treat spoken commands as a stationary stream, ignoring how the guide's communicative behavior changes as the task progresses. Using motion capture and speech data from two experimental configurations, humanhuman guidance (finger pointing, N =10 dyads) and humandrone teleoperation (gamepad control, N =29 dyads), we show that spontaneous vocal guidance consistently organizes into three kinematically and linguistically distinct phases: Orientation, Approach, and Adjustment. These phases are identified automatically via change point detection on 3D trajectory signals, and validated statistically (Kruskal-Wallis, p<.001). Three lexical families replicate across configurations: rotation vocabulary marks Orientation, translation vocabulary is scarce there, and attenuators accumulate toward Adjustment. Together with inter-utterance silence, these cues mark the Orientation boundary that speech rate alone leaves unmarked. The same three-phase structure emerges in both configurations despite radically different motor interfaces, suggesting it is an intrinsic property of human spatial guidance rather than an artifact of the experimental setup. We discuss implications for OAA-aware adaptive control in voice-guided teleoperation.

High-quality demonstrations for dexterous robot manipulation are costly and difficult to collect, whereas monocular human videos provide a scalable source of diverse manipulation behaviors. However, transferring such demonstrations to dexterous robots remains challenging: monocular hand-object interaction (HOI) reconstruction often produces temporally unstable contacts and physically implausible interactions, while conventional retargeting methods struggle to preserve task-relevant contacts and local interaction geometry across different hand embodiments. We present C2Dex, a video-to-dexterous-manipulation framework built around a shared interaction representation: stable object-side contacts recovered by aggregating noisy frame-wise observations in the canonical object space. These stable contacts serve a dual role: as trajectory-level constraints that guide reconstruction toward temporally coherent and physically plausible human HOI trajectories, and as explicit transfer targets for the dexterous hand, where Laplacian interaction optimization preserves the local hand-object geometry across embodiments and residual reinforcement learning refines the trajectory in simulation. Experiments on DexYCB and TACO show that C2Dex achieves end-to-end trajectory success rates of 57.78% and 26.67%, respectively, substantially outperforming the strongest baselines (17.78% and 10.00%) under identical evaluation criteria. Real-robot replay experiments further demonstrate physical feasibility across diverse contact-rich manipulation tasks. Project page: https://k-jie.github.io/C2Dex/