Human dexterity relies on rapid, sub-second motor adjustments, yet capturing these high-frequency dynamics remains an enduring challenge in biomechanics and robotics. Existing motion capture paradigms are compromised by a trade-off between temporal resolution and visual occlusion, failing to record the fine-grained hand motion of fast, contact-rich manipulation. Here we introduce T-800, a high-bandwidth data glove system that achieves synchronized, full-hand motion tracking at 800 Hz. By integrating a novel broadcast-based synchronization mechanism with a mechanical stress isolation architecture, our system maintains sub-frame temporal alignment across 18 distributed inertial measurement units (IMUs) during extended, vigorous movements. We demonstrate that T-800 recovers fine-grained manipulation details previously lost to temporal undersampling. Our analysis reveals that human dexterity exhibits significantly high-frequency motion energy (>100 Hz) that was fundamentally inaccessible due to the Nyquist sampling limit imposed by previous hardware constraints. To validate the system's utility for robotic manipulation, we implement a kinematic retargeting algorithm that maps T-800's high-fidelity human gestures onto dexterous robotic hand models. This demonstrates that the high-frequency motion data can be accurately translated while respecting the kinematic constraints of robotic hands, providing the rich behavioral data necessary for training robust control policies in the future.

This paper presents an experimental platform for studying intentional-state attribution toward a non-humanoid robot. The system combines a simulated robot, realistic task environments, and large language model-based explanatory layers that can express the same behavior in mentalistic, teleological, or mechanistic terms. By holding behavior constant while varying the explanatory frame, the platform provides a controlled way to investigate how language and framing shape the adoption of the intentional stance in robotics.

Recent advances in parallel computing and GPU acceleration have created new opportunities for computation-intensive learning problems such as Active SLAM -- where actions are selected to reduce uncertainty and improve joint mapping and localization. However, existing DRL-based approaches remain constrained by the lack of scalable parallel training. In this work, we address this challenge by proposing a scalable end-to-end DRL framework for Active SLAM that enables massively parallel training. Compared with the state of the art, our method significantly reduces training time, supports continuous action spaces and facilitates the exploration of more realistic scenarios. It is released as an open-source framework to promote reproducibility and community adoption.

Programming robots to perform complex tasks is often difficult and time consuming, requiring expert knowledge and skills in robot software and sometimes hardware. Imitation learning is a method for training robots to perform tasks by leveraging human expertise through demonstrations. Typically, the assumption is that those demonstrations are performed by a single, highly competent expert. However, in many real-world applications that use user demonstrations for tasks or incorporate both user data and pretrained data, such as home robotics including assistive robots, this is unlikely to be the case. This paper presents research towards a system which can leverage suboptimal demonstrations to solve ambiguous tasks; and particularly learn from its own failures. This is a negative-feedback system which achieves significant improvement over purely positive imitation learning for ambiguous tasks, achieving a 90% improvement in success rate against a system that does not utilise negative feedback, compared to a 50% improvement in success rate when utilised on a real robot, as well as demonstrating higher efficacy, memory efficiency and time efficiency than a comparable negative feedback scheme. The novel scheme presented in this paper is validated through simulated and real-robot experiments.

Action-conditioned robot world models generate future video frames of the manipulated scene given a robot action sequence, offering a promising alternative for simulating tasks that are difficult to model with traditional physics engines. However, these models are optimized for short-term prediction and break down when deployed autoregressively: each predicted clip feeds back as context for the next, causing errors to compound and visual quality to rapidly degrade. We address this through the following contributions. First, we introduce a reinforcement learning (RL) post-training scheme that trains the world model on its own autoregressive rollouts rather than on ground-truth histories. We achieve this by adapting a recent contrastive RL objective for diffusion models to our setting and show that its convergence guarantees carry over exactly. Second, we design a training protocol that generates and compares multiple candidate variable-length futures from the same rollout state, reinforcing higher-fidelity predictions over lower-fidelity ones. Third, we develop efficient, multi-view visual fidelity rewards that combine complementary perceptual metrics across camera views and are aggregated at the clip level for dense, low-variance training signal. Fourth, we show that our approach establishes a new state-of-the-art for rollout fidelity on the DROID dataset, outperforming the strongest baseline on all metrics (e.g., LPIPS reduced by 14% on external cameras, SSIM improved by 9.1% on the wrist camera), winning 98% of paired comparisons, and achieving an 80% preference rate in a blind human study.

Markerless biomechanics increasingly relies on 3D skeletal keypoints extracted from video, yet downstream biomechanical mappings typically treat these estimates as deterministic, providing no principled mechanism for frame-wise quality control. In this work, we investigate predictive uncertainty as a quantitative measure of confidence for mapping 3D pose keypoints to 3D anatomical landmarks, a critical step preceding inverse kinematics and musculoskeletal analysis. Within a temporal learning framework, we model both uncertainty arising from observation noise and uncertainty related to model limitations. Using synchronized motion capture ground truth on AMASS, we evaluate uncertainty at frame and joint level through error--uncertainty rank correlation, risk--coverage analysis, and catastrophic outlier detection. Across experiments, uncertainty estimates, particularly those associated with model uncertainty, exhibit a strong monotonic association with landmark error (Spearman $ρ\approx 0.63$), enabling selective retention of reliable frames (error reduced to $\approx 16.8$ mm at 10% coverage) and accurate detection of severe failures (ROC-AUC $\approx 0.92$ for errors $>50$ mm). Reliability ranking remains stable under controlled input degradation, including Gaussian noise and simulated missing joints. In contrast, uncertainty attributable to observation noise provides limited additional benefit in this setting, suggesting that dominant failures in keypoint-to-landmark mapping are driven primarily by model uncertainty. Our results establish predictive uncertainty as a practical, frame-wise tool for automatic quality control in markerless biomechanical pipelines.

Prolonged mid-air interaction in virtual reality (VR) causes arm fatigue and discomfort, negatively affecting user experience. Incorporating ergonomic considerations into VR user interface (UI) design typically requires extensive human-in-the-loop evaluation. Although biomechanical models have been used to simulate human behavior in HCI tasks, their application as surrogate users for ergonomic VR UI design remains underexplored. We propose a hierarchical reinforcement learning framework that leverages biomechanical user models to evaluate and optimize VR interfaces for mid-air interaction. A motion agent is trained to perform button-press tasks in VR under sequential conditions, using realistic movement strategies and estimating muscle-level effort via a validated three-compartment control with recovery (3CC-r) fatigue model. The simulated fatigue output serves as feedback for a UI agent that optimizes UI element layout via reinforcement learning (RL) to minimize fatigue. We compare the RL-optimized layout against a manually-designed centered baseline and a Bayesian optimized baseline. Results show that fatigue trends from the biomechanical model align with human user data. Moreover, the RL-optimized layout using simulated fatigue feedback produced significantly lower perceived fatigue in a follow-up human study. We further demonstrate the framework's extensibility via a simulated case study on longer sequential tasks with non-uniform interaction frequencies. To our knowledge, this is the first work using simulated biomechanical muscle fatigue as a direct optimization signal for VR UI layout design. Our findings highlight the potential of biomechanical user models as effective surrogate tools for ergonomic VR interface design, enabling efficient early-stage iteration with less reliance on extensive human participation.

The prevailing paradigm for image-goal visual navigation often assumes access to large-scale datasets, substantial pretraining, and significant computational resources. In this work, we challenge this assumption. We show that we can collect a dataset, train an in-domain policy, and deploy it to the real world (1) in less than 120 minutes, (2) on a consumer laptop, (3) without any human intervention. Our method, MINav, formulates image-goal navigation as an offline goal-conditioned reinforcement learning problem, combining unsupervised data collection with hindsight goal relabeling and offline policy learning. Experiments in simulation and the real world show that MINav improves exploration efficiency, outperforms zero-shot navigation baselines in target environments, and scales favorably with dataset size. These results suggest that effective real-world robotic learning can be achieved with high computational efficiency, lowering the barrier to rapid policy prototyping and deployment.

In this paper, we present a Koopman autoencoder-based least-squares policy iteration (KAE-LSPI) algorithm in reinforcement learning (RL). The KAE-LSPI algorithm is based on reformulating the so-called least-squares fixed-point approximation method in terms of extended dynamic mode decomposition (EDMD), thereby enabling automatic feature learning via the Koopman autoencoder (KAE) framework. The approach is motivated by the lack of a systematic choice of features or kernels in linear RL techniques. We compare the KAE-LSPI algorithm with two previous works, the classical least-squares policy iteration (LSPI) and the kernel-based least-squares policy iteration (KLSPI), using stochastic chain walk and inverted pendulum control problems as examples. Unlike previous works, no features or kernels need to be fixed a priori in our approach. Empirical results show the number of features learned by the KAE technique remains reasonable compared to those fixed in the classical LSPI algorithm. The convergence to an optimal or a near-optimal policy is also comparable to the other two methods.