Papers for 2026-09-17
10 papersWeave: Learning Whole-Body Dexterous Loco-Manipulation from Human-Object Interactions
原摘要
Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/
原摘要
Humanoid robots often execute motion commands through whole-body controllers (WBCs) that track targets while maintaining balance and stability. However, most WBCs are blind to scene geometry, which can lead to collisions from imperfect target motions that are geometrically unsafe due to perception, planning, or teleoperation errors. We propose RECAL, a Robot--Environment Cross-Attention Layer that wraps a blind WBC to trade off target tracking against collision avoidance using external scene geometry. RECAL supports collision-aware tracking of floating-base and end-effector commands, including collision avoidance for held objects. It represents the robot, held objects, and environment as point clouds, using cross-attention between robot/object points and the environment to produce geometry-aware control features. In simulation, RECAL improves collision avoidance while preserving target-tracking performance across frozen-arm and adaptive-arm locomotion, object-carrying, and standing-manipulation scenarios relative to alternative geometry-aware WBC architectures. We further demonstrate the controller on a real Digit V3 humanoid robot.
WholeBodyWAM: Generalizing Pre-trained World-Action Priors to Humanoid Loco-Manipulation via WBC-Grounded Coordination
原摘要
World Action Models (WAMs) offer a promising approach to general-purpose robot manipulation by jointly modeling visual dynamics and actions. However, most WAM studies focus on tabletop or arm-centric manipulation, while humanoid loco-manipulation remains less explored. To address this gap, we introduce WholeBodyWAM, which jointly predicts future visual dynamics, manipulation actions, and whole-body control intents for generalizable humanoid loco-manipulation. It preserves pre-trained world-action priors while grounding heterogeneous whole-body controller (WBC) semantics and coordinating whole-body behavior. Extensive experiments show that WholeBodyWAM achieves an overall simulation task success rate of 91.9%, with a 0.23 improvement in real-world out-of-distribution task progress and a 70% reduction in success-rate variance across WBCs relative to the respective baselines. These results suggest a path toward scalable humanoid whole-body intelligence by extending pre-trained world-action priors through structured WBC grounding and coordination, rather than relearning whole-body behavior from scratch. Project page: https://wholebodywam.github.io/.
Fingers as Legs: Learning Self-Supported Locomotion and Manipulation with an Anthropomorphic Hand
原摘要
A walking robotic hand must use the same fingers to move its body, support its weight, and interact with the environment. We show how an anthropomorphic hand can learn these skills while retaining its finger design and position controller. Onboard power and computation make the platform self-contained. Our reinforcement learning approach accounts for the hand's unequal fingers, with training in a simulator calibrated from hardware measurements. In simulation, the hand moves faster with our reward formulation than with tuned rewards originally designed for quadrupeds. On hardware, task-specific policies enable untethered crawling, steering, and fall recovery. While supporting its own weight, the hand also executes successive keyboard commands without vision and pushes an object to targets using overhead visual feedback. These results demonstrate a compact mobile manipulator that reuses its fingers for locomotion and interaction, without a separate locomotion mechanism.
CAP: Continuously Adaptive Perception-Blind Humanoid Locomotion via Learned Denoising
原摘要
Humanoid locomotion across complex terrain demands forward-looking exteroception to anticipate obstacles, yet this signal is unreliable in real-world deployment, failing partially and intermittently. Existing perceptive policies often assume that depth observations remain clean and in-distribution, while recent attempts to unify perceptive and blind control typically route or switch between separate sub-policies, leaving recoverable information in partially corrupted depth unexploited. We instead propose CAP, a single-stage humanoid locomotion policy that recovers this signal with a perceptive world-model encoder trained as a learned denoiser to reconstruct clean depth from a corrupted input, together with a co-active proprioceptive variational encoder that supplies depth-free body-state information. A coupled training recipe pairs a depth-noise curriculum on the world-model input with world-model feature dropout on the policy-facing latent, exposing the policy to failures across the entire perception-quality spectrum. In simulation, CAP matches or improves upon perceptive baselines when depth remains informative, and degrades more smoothly than a binary-switching baseline as perception worsens. On the Unitree G1, controlled trials and indoor-outdoor deployments demonstrate perception-robust locomotion under intermittent occlusion, real-sensor corruption, and outdoor depth artifacts.
Learning-Based Dynamic Obstacle Avoidance for a UAV Using Only Three Range Sensors
原摘要
We present a learning-based approach to kinodynamic online motion planning for an Unmanned Aerial Vehicle (UAV) operating at a fixed altitude in unknown dynamic environments, where real-time avoidance of both static and dynamic obstacles must be achieved under conditions of extreme partial observability. The UAV is controlled with a single degree of freedom (yaw only), resulting in constrained, nonholonomic motion similar to fixed-wing platforms. The proposed framework integrates a behavior grid map representation with Deep Reinforcement Learning (DRL), using Proximal Policy Optimization (PPO) for stable policy learning in continuous control. The key idea is the co-design of a state representation and control policy that enables reliable navigation using only three low-cost directional range sensors, without reliance on dense sensing modalities such as LiDAR or vision-based systems. The behavior grid map dynamically aggregates sparse measurements into a structured local representation that supports real-time decision-making for obstacle avoidance and target reaching. Extensive simulations across environments of varying sizes and obstacle densities demonstrate that the proposed standard and enhanced methods achieve higher success rates than PPO variants and Model Predictive Control (MPC) (94\% vs. 79--90\% in small-scale high-congestion scenarios, and 83\% vs. 62--71\% in large-scale high-congestion scenarios), while maintaining real-time performance. Real-world experiments across four scenarios further confirm practical feasibility, with consistent target-reaching behaviour and no collisions under the tested conditions.
VGFM: Expressive Robot Policies via Dense Value Guidance in Flow Matching
原摘要
Recent robot learning paradigms increasingly rely on large offline datasets of robotic interactions to train control policies. Expressive generative models enable rich and multimodal action representations, expanding the capability of this paradigm for complex robotic control. However, policy improvement with multi-step generative actors remains challenging. In offline reinforcement learning (RL), incorporating value-based objectives along generative trajectories often introduces substantial training complexity, including backpropagation through time (BPTT), auxiliary architectures, or distillation losses. We propose Value-Guided Flow Matching (VGFM), a scalable offline RL framework that enables dense value-guided shaping within a flow-based policy while avoiding BPTT and additional algorithmic overhead. VGFM parameterizes the policy as a conditional flow-matching model in action (x-prediction) space, ensuring that each intermediate flow step produces a valid robot action that can be directly evaluated by a standard offline RL critic. This design allows value guidance to be applied at randomly sampled flow times without differentiating through the entire generative trajectory, while preserving inference-time flexibility by varying the discretization of the underlying flow ODE without retraining. Evaluated on robotic locomotion and manipulation tasks in OGBench, VGFM achieves strong performance across a wide range of tasks under rigorous evaluation protocols. With minimal hyperparameter tuning, these results demonstrate that VGFM provides a simple, scalable, and effective approach for expressive policy learning in long-horizon, goal-oriented robotic control.
Optimized Wrench Polytope Analysis for Real-Time Stability Control of Legged Robots in Complex Multi-Contact Configurations
原摘要
Legged robots offer a variety of automation applications in real-world scenarios. But areas that are difficult to traverse, like slopes, caves, or scaffolding, still pose a great challenge for traversal. To tackle this problem, we propose an optimized algorithm for evaluating the full actuatable wrench polytope for arbitrary contact scenarios. With our improved analysis algorithm, the torques for each joint of the robot can be calculated within a control frequency of 49 Hz. The achieved speedup allows for deployment within a regular control loop for actuating robot poses for different contact scenarios. We evaluated our stability controller extensively in simulation scenarios and validated its applicability by deploying it on actual walking robot hardware. The proposed controller achieved stability in very complex scenarios that are currently not achievable by any other controller.
Real-World Reinforcement Learning with MPC Scaffolding for Dexterous Manipulation
原摘要
Real-world reinforcement learning (RL) offers a promising route to dexterous manipulation policies that can adapt directly from physical interaction, but learning is hindered by inefficient early exploration and costly failures. We propose a framework that uses sampling-based model predictive control (MPC) as scaffolding for real-world dexterous RL, providing structured prior experience and task-directed guidance during learning without human demonstrations or corrective actions. A small set of MPC trajectories is first used to populate an offline replay buffer and to pretrain the actor and critic. During online learning, MPC intermittently guides data collection while an off-policy Soft Actor-Critic learner trains from both prior MPC experience and newly collected physical interaction, with control gradually transitioning to the learned policy. On continuous in-hand rotation with a 16-DoF Allegro hand, the method reaches 100\% success in policy-only evaluation (5/5 trials) after 7 minutes of online RL, following initialization with 20 MPC trajectories collected on hardware in 12 minutes. Online training incurs about three object drops on average. After 20 minutes of online learning, the policy achieves more than five times the rotation speed of the MPC controller. It completes 1000 consecutive rotations over more than 110 minutes without a drop. Ablations show complementary benefits from MPC-based pretraining, retained MPC experience, and online MPC guidance. We further demonstrate rapid adaptation to different object geometries and successful goal-conditioned reorientation, showing that the framework enables efficient, low-intervention, real-world dexterous RL.
Reflex-Informed Neuromuscular Reinforcement Learning for Muscle-Driven Locomotion
原摘要
Muscle-driven locomotion provides a physically grounded approach to generating realistic human movement. However, achieving both physiological plausibility and adaptability to changes in musculoskeletal capacity and external disturbances remains a fundamental challenge. To address this limitation, we propose a Reflex-Informed Neuromuscular Reinforcement Learning framework for muscle-driven locomotion. Within this framework, a fixed phase-dependent reflex controller serves as the underlying neuromuscular control mechanism, while the reinforcement learning policy produces four biomechanically meaningful residual parameters to modulate key reflex gains and thresholds associated with hip swing, knee support, and ankle propulsion according to the current state. Experimental results demonstrate that the proposed framework generates physiologically plausible locomotion with improved kinematic accuracy and dynamic consistency, as well as better bilateral symmetry and stride-to-stride consistency under nominal walking conditions. The learned policy remains robust under muscle weakness and external perturbations without retraining.