Papers for 2026-02-17
10 papers原摘要
Imitation learning frameworks that learn robot control policies from demonstrators' motions via hand-mounted demonstration interfaces have attracted increasing attention. However, due to differences in physical characteristics between demonstrators and robots, this approach faces two limitations: i) the demonstration data do not include robot actions, and ii) the demonstrated motions may be infeasible for robots. These limitations make policy learning difficult. To address them, we propose Feasibility-Aware Behavior Cloning from Observation (FABCO). FABCO integrates behavior cloning from observation, which complements robot actions using robot dynamics models, with feasibility estimation. In feasibility estimation, the demonstrated motions are evaluated using a robot-dynamics model, learned from the robot's execution data, to assess reproducibility under the robot's dynamics. The estimated feasibility is used for multimodal feedback and feasibility-aware policy learning to improve the demonstrator's motions and learn robust policies. Multimodal feedback provides feasibility through the demonstrator's visual and haptic senses to promote feasible demonstrated motions. Feasibility-aware policy learning reduces the influence of demonstrated motions that are infeasible for robots, enabling the learning of policies that robots can execute stably. We conducted experiments with 15 participants on two tasks and confirmed that FABCO improves imitation learning performance by more than 3.2 times compared to the case without feasibility feedback.
原摘要
Sparsity is a well-studied technique for compressing deep neural networks (DNNs) without compromising performance. In deep reinforcement learning (DRL), neural networks with up to 5% of their original weights can still be trained with minimal performance loss compared to their dense counterparts. However, most existing methods rely on unstructured fine-grained sparsity, which limits hardware acceleration opportunities due to irregular computation patterns. Structured coarse-grained sparsity enables hardware acceleration, yet typically degrades performance and increases pruning complexity. In this work, we present, to the best of our knowledge, the first study on N:M structured sparsity in RL, which balances compression, performance, and hardware efficiency. Our framework enforces row-wise N:M sparsity throughout training for all networks in off-policy RL (TD3), maintaining compatibility with accelerators that support N:M sparse matrix operations. Experiments on continuous-control benchmarks show that RNM-TD3, our N:M sparse agent, outperforms its dense counterpart at 50%-75% sparsity (e.g., 2:4 and 1:4), achieving up to a 14% increase in performance at 2:4 sparsity on the Ant environment. RNM-TD3 remains competitive even at 87.5% sparsity (1:8), while enabling potential training speedups.
原摘要
Friction is the essential mediator of terrestrial locomotion, yet in robotic systems it is almost always treated as a passive property fixed by surface materials and conditions. Here, we introduce ultrasonic lubrication as a method to actively control friction in robotic locomotion. By exciting resonant structures at ultrasonic frequencies, contact interfaces can dynamically switch between "grip" and "slip" states, enabling locomotion. We developed two friction control modules, a cylindrical design for lumen-like environments and a flat-plate design for external surfaces, and integrated them into bio-inspired systems modeled after inchworm and wasp ovipositor locomotion. Both systems achieved bidirectional locomotion with nearly perfect locomotion efficiencies that exceeded 90%. Friction characterization experiments further demonstrated substantial friction reduction across various surfaces, including rigid, soft, granular, and biological tissue interfaces, under dry and wet conditions, and on surfaces with different levels of roughness, confirming the broad applicability of ultrasonic lubrication to locomotion tasks. These findings establish ultrasonic lubrication as a viable active friction control mechanism for robotic locomotion, with the potential to reduce design complexity and improve efficiency of robotic locomotion systems.
原摘要
Emergency situations that require the evacuation of urban areas can arise from man-made causes (e.g., terrorist attacks or industrial accidents) or natural disasters, the latter becoming more frequent due to climate change. As a result, effective and fast methods to develop evacuation plans are of great importance. In this work, we identify and propose the Bus Evacuation Orienteering Problem (BEOP), an NP-hard combinatorial optimization problem with the goal of evacuating as many people from an affected area by bus in a short, predefined amount of time. The purpose of bus-based evacuation is to reduce congestion and disorder that arises in purely car-focused evacuation scenarios. To solve the BEOP, we propose a deep reinforcement learning-based method utilizing graph learning, which, once trained, achieves fast inference speed and is able to create evacuation routes in fractions of seconds. We can bound the gap of our evacuation plans using an MILP formulation. To validate our method, we create evacuation scenarios for San Francisco using real-world road networks and travel times. We show that we achieve near-optimal solution quality and are further able to investigate how many evacuation vehicles are necessary to achieve certain bus-based evacuation quotas given a predefined evacuation time while keeping run time adequate.
原摘要
Efficiently training control policies for robots is a major challenge that can greatly benefit from utilizing knowledge gained from training similar systems through cross-embodiment knowledge transfer. In this work, we focus on accelerating policy training using a library-based initialization scheme that enables effective knowledge transfer across multirotor configurations. By leveraging a physics-aware neural control architecture that combines a reinforcement learning-based controller and a supervised control allocation network, we enable the reuse of previously trained policies. To this end, we utilize a policy evaluation-based similarity measure that identifies suitable policies for initialization from a library. We demonstrate that this measure correlates with the reduction in environment interactions needed to reach target performance and is therefore suited for initialization. Extensive simulation and real-world experiments confirm that our control architecture achieves state-of-the-art control performance, and that our initialization scheme saves on average up to $73.5\%$ of environment interactions (compared to training a policy from scratch) across diverse quadrotor and hexarotor designs, paving the way for efficient cross-embodiment transfer in reinforcement learning.
Fluoroscopy-Constrained Magnetic Robot Control via Zernike-Based Field Modeling and Nonlinear MPC
原摘要
Magnetic actuation enables surgical robots to navigate complex anatomical pathways while reducing tissue trauma and improving surgical precision. However, clinical deployment is limited by the challenges of controlling such systems under fluoroscopic imaging, which provides low frame rate and noisy pose feedback. This paper presents a control framework that remains accurate and stable under such conditions by combining a nonlinear model predictive control (NMPC) framework that directly outputs coil currents, an analytically differentiable magnetic field model based on Zernike polynomials, and a Kalman filter to estimate the robot state. Experimental validation is conducted with two magnetic robots in a 3D-printed fluid workspace and a spine phantom replicating drug delivery in the epidural space. Results show the proposed control method remains highly accurate when feedback is downsampled to 3 Hz with added Gaussian noise (sigma = 2 mm), mimicking clinical fluoroscopy. In the spine phantom experiments, the proposed method successfully executed a drug delivery trajectory with a root mean square (RMS) position error of 1.18 mm while maintaining safe clearance from critical anatomical boundaries.
OSCAR: An Ovipositor-Inspired Self-Propelling Capsule Robot for Colonoscopy
原摘要
Self-propelling robotic capsules eliminate shaft looping of conventional colonoscopy, reducing patient discomfort. However, reliably moving within the slippery, viscoelastic environment of the colon remains a significant challenge. We present OSCAR, an ovipositor-inspired self-propelling capsule robot that translates the transport strategy of parasitic wasps into a propulsion mechanism for colonoscopy. OSCAR mechanically encodes the ovipositor-inspired motion pattern through a spring-loaded cam system that drives twelve circumferential sliders in a coordinated, phase-shifted sequence. By tuning the motion profile to maximize the retract phase relative to the advance phase, the capsule creates a controlled friction anisotropy at the interface that generates net forward thrust. We developed an analytical model incorporating a Kelvin-Voigt formulation to capture the viscoelastic stick--slip interactions between the sliders and the tissue, linking the asymmetry between advance and retract phase durations to mean thrust, and slider-reversal synchronization to thrust stability. Comprehensive force characterization experiments in ex-vivo porcine colon revealed a mean steady-state traction force of 0.85 N, closely matching the model. Furthermore, experiments confirmed that thrust generation is speed-independent and scales linearly with the phase asymmetry, in agreement with theoretical predictions, underscoring the capsule's predictable performance and scalability. In locomotion validation experiments, OSCAR demonstrated robust performance, achieving an average speed of 3.08 mm/s, a velocity sufficient to match the cecal intubation times of conventional colonoscopy. By coupling phase-encoded friction anisotropy with a predictive model, OSCAR delivers controllable thrust generation at low normal loads, enabling safer and more robust self-propelling locomotion for robotic capsule colonoscopy.
BPP: Long-Context Robot Imitation Learning by Focusing on Key History Frames
原摘要
Many robot tasks require attending to the history of past observations. For example, finding an item in a room requires remembering which places have already been searched. However, the best-performing robot policies typically condition only on the current observation, limiting their applicability to such tasks. Naively conditioning on past observations often fails due to spurious correlations: policies latch onto incidental features of training histories that do not generalize to out-of-distribution trajectories upon deployment. We analyze why policies latch onto these spurious correlations and find that this problem stems from limited coverage over the space of possible histories during training, which grows exponentially with horizon. Existing regularization techniques provide inconsistent benefits across tasks, as they do not fundamentally address this coverage problem. Motivated by these findings, we propose Big Picture Policies (BPP), an approach that conditions on a minimal set of meaningful keyframes detected by a vision-language model. By projecting diverse rollouts onto a compact set of task-relevant events, BPP substantially reduces distribution shift between training and deployment, without sacrificing expressivity. We evaluate BPP on four challenging real-world manipulation tasks and three simulation tasks, all requiring history conditioning. BPP achieves 70% higher success rates than the best comparison on real-world evaluations. Videos are available at https://bigpicturepolicies.github.io/
MyoInteract: A Framework for Fast Prototyping of Biomechanical HCI Tasks using Reinforcement Learning
原摘要
Reinforcement learning (RL)-based biomechanical simulations have the potential to revolutionise HCI research and interaction design, but currently lack usability and interpretability. Using the Human Action Cycle as a design lens, we identify key limitations of biomechanical RL frameworks and develop MyoInteract, a novel framework for fast prototyping of biomechanical HCI tasks. MyoInteract allows designers to setup tasks, user models, and training parameters from an easy-to-use GUI within minutes. It trains and evaluates muscle-actuated simulated users within minutes, reducing training times by up to 98%. A workshop study with 12 interaction designers revealed that MyoInteract allowed novices in biomechanical RL to successfully setup, train, and assess goal-directed user movements within a single session. By transforming biomechanical RL from a days-long expert task into an accessible hour-long workflow, this work significantly lowers barriers to entry and accelerates iteration cycles in HCI biomechanics research.
Latency-aware Human-in-the-Loop Reinforcement Learning for Semantic Communications
原摘要
Semantic communication promises task-aligned transmission but must reconcile semantic fidelity with stringent latency guarantees in immersive and safety-critical services. This paper introduces a time-constrained human-in-the-loop reinforcement learning (TC-HITL-RL) framework that embeds human feedback, semantic utility, and latency control within a semantic-aware Open radio access network (RAN) architecture. We formulate semantic adaptation driven by human feedback as a constrained Markov decision process (CMDP) whose state captures semantic quality, human preferences, queue slack, and channel dynamics, and solve it via a primal--dual proximal policy optimization algorithm with action shielding and latency-aware reward shaping. The resulting policy preserves PPO-level semantic rewards while tightening the variability of both air-interface and near-real-time RAN intelligent controller processing budgets. Simulations over point-to-multipoint links with heterogeneous deadlines show that TC-HITL-RL consistently meets per-user timing constraints, outperforms baseline schedulers in reward, and stabilizes resource consumption, providing a practical blueprint for latency-aware semantic adaptation.