This paper presents ERNEST, a four-wheeled planetary rover concept equipped with a two-degree-of-freedom Active Gimbal Suspension that combines yaw and roll actuation to enable wheel reconfiguration, steering, and active load redistribution. A single neural network controller, trained to track a desired path across challenging terrain, fully unlocks the capabilities of this actuated suspension system for autonomous obstacle negotiation. A reinforcement learning framework is developed using the high-fidelity DARTS simulation engine, which combines rigid-contact dynamics and Bekker-Wong terramechanics, enabling the emergence of locomotion strategies adapted to loose-soil conditions. To obtain a single unified controller across heterogeneous terrains, a policy consolidation strategy merges the experience of terrain-specialized agents into one neural network, eliminating the need for explicit terrain classification and controller switching. The resulting controller operates on a combination of proprioceptive and exteroceptive feedback, including sparse stereo-derived terrain elevation, chassis attitude, joint states, and force-torque measurements. Zero-shot transfer to the physical rover is achieved through domain randomization, sensor noise injection, and model-to-real system identification. Experimental results demonstrate autonomous traversal of rock fields, a bump trap, a wheel-high step, sand ripples, and sandy slopes. On a 20° sandy slope, the learned controller reduces the cost of transport by 37% on dry sand despite the additional actuation, and achieves superior performance on wet sand where the passive suspension becomes completely immobilized.

Simulation is central to robot learning, yet the sim-to-real gap remains a major bottleneck. Existing approaches often tackle visual or dynamic gaps separately, overlooking how these individual mismatches accumulate and propagate throughout the robot's state evolution. In this paper, we introduce QuadVerse, an integrated framework that uses reconstructed scenes as a calibration substrate for aligning visual perception, physical interaction, and actuator dynamics. From captured RGB videos, we reconstruct geometry-constrained 3D Gaussian Splatting (3DGS) scenes that support batched photorealistic ego-view rendering and collision-ready semantic mesh extraction. The meshes further enable contact calibration by initializing spatially varying friction priors and refining them through trajectory-based posterior search. To address remaining actuator discrepancies, QuadVerse trains a residual dynamics compensator by replaying real-world trajectories on the contact-calibrated terrain, reducing the entanglement between terrain-induced contact errors and actuator non-idealities. Experiments show that QuadVerse improves reconstruction quality and locomotion tracking over relevant baselines. Leveraging this foundation, we demonstrate robust zero-shot visual-navigation policy deployment without task-specific real-world rollouts.

We argue that high-quality motion data can steer tracking policies toward better optimization trajectories early in training. In this work, we introduce LIMMT (Less Is More for Motion Tracking). To our knowledge, this is the first data-centric study for physics-based humanoid motion tracking. We go beyond simply removing low-quality and erroneous clips, but define motion data quality through three dimensions: physics feasibility, diversity, and complexity. We show that even training with under 3% of AMASS yields better tracking performance than training with the full dataset. We further conduct data cleaning on the estimated web-sourced mocap data. Extensive experiments and analyses validate the effectiveness of our framework.

Aquatic robots have expanded human access to underwater environments, yet many underwater spaces contain obstacles that can disrupt open-water locomotion. In "hydro-cluttered" environments, water is interspersed with rigid and flexible clutter, making body-obstacle contact unavoidable. Operating in these spaces requires robots that can regulate and exploit contact, but this regime remains difficult to model or simulate. Building on recent advances in mechanical intelligence in terradynamically capable limbless robotics, we develop principles for 3D aquatic locomotion using AquaMILR, an elongate limbless robot that combines bilateral cable-driven actuation, programmable body compliance, distributed depth regulation, corrosion-resistant enclosures, and onboard power and electronics for untethered field operation. Systematic robophysical experiments reveal that programmable body compliance regulates body deformation and converts body-environment interactions into fast, robust, forward progression across increasing hydro-clutter constraint strength. Depth regulation provides three-dimensional access, allowing the robot to bypass clutter, recover from obstruction, and continue through otherwise inaccessible routes. In potential jamming scenarios, emergent inertia-induced rolling acts as a spontaneous recovery mechanism, freeing the robot from clutter that would otherwise lead to failure and allowing locomotion to continue without additional control. Tests of the robot in an aquatic mangrove field demonstrate that these principles transfer to practical operation, enabling navigation and onboard visual inspection of inaccessible root zones. These results establish principles for hydro-cluttered locomotion and a design paradigm in which aquatic robots exploit environmental complexity as a locomotor resource.

Biosignals-free shared-autonomy control of upper-limb prosthetic hands aims to enable natural and low-effort manipulation without relying on EMG or other physiological signals. Recent imitation-learning-based approaches have shown promising results, but their scalability is limited by the cost and variability of collecting large amounts of real-world human demonstration data. In this work, we present a scalable simulation framework that automatically generates diverse reach-to-grasp demonstrations from a wrist-mounted virtual camera. The framework combines physically feasible grasp synthesis, natural reaching trajectories retargeting, and reach--grasp--lift execution in procedurally generated indoor environments. It records wrist-view observations, proprioception, and actions to build a large-scale demonstration dataset for imitation learning. Through extensive simulation benchmarks, we evaluate object and scene generalization and compare several representative state-of-the-art imitation learning methods. Results show that the simulated demonstrations are sufficiently rich and consistent for effective policy learning. In three realistic settings, the learned sim-to-real policy achieves over 90\% grasp success, surpasses baseline methods, and exhibits stronger generalization, highlighting the promise of simulation-driven training for biosignals-free shared-autonomy prosthetic grasping. The demonstrations are available at \href{https://sites.google.com/view/sim-prosthetic-grasp/home}{https://sites.google.com/view/sim-prosthetic-grasp/home}.

Scaling reinforcement learning (RL) to diverse multitask settings remains a central challenge. While recent advances in model-based RL achieve strong performance, they rely on planning and complex training pipelines, making it unclear which components are essential for scalability. We revisit this question and argue that the primary driver of scalable multitask RL is not model-based control, but \emph{representation learning}. In particular, we show that combining predictive, model-based representations with high-capacity value function approximation is sufficient to achieve strong performance, even without planning. We evaluate a simple model-free algorithm, MR.Q, coupled with auxiliary predictive objectives into a scalable actor-critic architecture. This approach outperforms a recent world-model-based method and a range of deep RL baselines across a diverse suite of multitask continuous control tasks, while significantly reducing computational overhead and improving wall-clock efficiency. We observe consistent improvements with increased model capacity and show through ablations that predictive representation learning is critical for performance.