Papers for 2026-11-01
10 papersRobotic Data Inoculation
原摘要
Modern robot learning systems feed on high-quality demonstration data, and their performance hinges on coverage. Without good coverage, small errors compound and the policy can quickly go into out-of-distribution states from which it cannot recover. Yet there is no principled way of collecting high-coverage data, and data collection often relies on heuristic instructions to human operators. Purely online reinforcement learning (RL) explores at the cost of safety and sample efficiency, while DAgger-style interventions require the policy to fail by chance before a human can correct it. In this paper, we ask instead whether we can modify how the robot behaves during data collection to collect more useful data. We propose Data Inoculation (DI), a shared-control framework in which a human provide closed-loop teleoperation commands while a residual policy perturbs these commands. The residual policy is trained online, on the growing dataset, with the same reward-maximizing objective later used for policy extraction, so its perturbations steer data collection toward the deviations a policy trained on the data would make. These perturbations expose the robot to a wider range of states, while the human's continuous corrections provide recovery demonstrations, "inoculating" the dataset against the learner's future mistakes while the human remains in control. On three challenging real-world robotic tasks, DI consistently improves or matches the success rate of policies trained with both behavioral cloning and offline RL, showing DI as an effective data collection strategy for improving downstream policy performance.
Event2Reward: Learning Robotic Rewards from Progress Relations
原摘要
Learning task progress from robot demonstrations provides a practical way to construct dense shaping rewards for robotic reinforcement learning. A common approach uses normalized demonstration time as progress labels, implicitly assuming monotonically increasing task progress. During policy exploration, however, actual task progress can stall or even regress. Such models may mistake regressions for progress, assigning positive shaping rewards to actions that cause progress loss. Real suboptimal and failed executions offer corrective experience, but assigning absolute progress values to their states is difficult. Our key observation is that stalls, regressions, and recoveries establish local relative progress relations even when absolute progress is unknown. We introduce Event2Reward, which uses normalized temporal labels to anchor the progress scale and these within-trajectory relations to constrain local changes, combining absolute and relative progress supervision. Its progress predictions serve as potentials for reward shaping. We curate an event-annotated dataset from approximately 100K raw real-robot execution records, covering successful, suboptimal, and failed executions, without requiring framewise absolute progress labels. Under the same training budgets, Event2Reward improves average policy success by 18.16 percentage points over a baseline using only sparse task rewards across 40 tasks in four LIBERO suites. On real robots, average success after 30 minutes of wall-clock training reaches 60.0% on three precise insertion tasks and 90.0% on three object manipulation tasks, exceeding the sparse-reward baseline under the same budget by 36.7 and 23.3 percentage points, respectively. Ablation studies further show that absolute progress supervision and relative progress relations are complementary, with joint supervision yielding better downstream policy learning.
ETA-Motion: Efficient Topology-Agnostic Motion Diffusion via Sparse Joint Learning
原摘要
Topology-agnostic motion generation aims to synthesize motions for diverse characters with arbitrary skeletons. Unlike conventional motion generation, which assumes a fixed skeletal template, this setting must handle diverse joint configurations and inconsistent joint semantics across characters. Existing methods address this challenge through dense full-joint modeling, which incurs substantial computational cost and hinders learning transferable motion patterns across diverse skeletal topologies. We present ETA-Motion, a topology-agnostic motion generation framework based on sparse joint learning. Instead of learning motion from all joints, our method uses a compact subset of joints to reduce redundancy and trains the motion generator on the resulting sparse skeleton. To facilitate correspondence across diverse topologies, we introduce semantic joint embeddings that combine textual and visual cues, together with topology-aware training objectives for preserving skeletal structure. Although ETA-Motion is trained only on sparse skeletal observations, it supports full-skeleton motion generation during inference. Experimental results demonstrate that ETA-Motion outperforms existing topology-agnostic baselines while significantly improving efficiency and generalization to unseen motions and unseen topologies.
Energy-Score Stabilized Attentive Mixture-Density Policy: A Lightweight Approach to Multimodal Robot Motion
原摘要
For practical motion generation, it is essential to handle multimodality (multiple actions can be correct for the same observation) while maintaining low inference cost and strong generalization from limited demonstrations. We introduce an attentive mixture-density policy trained with the Energy Score that represents future visuomotor trajectories as explicit probability distributions with a single forward pass. Concretely, we output Gaussian mixture parameters for joint commands (and optionally attention points) and optimize them with the Energy Score (computed as a sum of 1D CRPS under a diagonal covariance assumption) instead of the negative log-likelihood (NLL) to avoid MDN singularities and gradient-scale instabilities. Our architecture couples explicit spatial attention with mixture-density outputs, enabling robust multimodal behavior selection under visual noise and small-data regimes. On an 8-DOF manipulator, the method generates distinct avoidance trajectories and stabilizes learning in obstacle avoidance. Moreover, in a randomized moving-object grasping task, where spatiotemporal multimodality and fast timing decisions are required, the proposed model outperforms Diffusion Policy by 15-25% under several unseen conditions, demonstrating superior generalization and real-time feasibility.
JEDI: Joint-Embedding Demonstration Compression for In-Context Imitation Learning
原摘要
In-context imitation learning (ICIL) adapts robot policies through test-time demonstrations, but long multimodal trajectories constrain how many examples fit in context. We ask what a compressed demonstration should preserve. We propose JEDI, which compresses demonstrations into latent slots trained to predict the query episode's next-stage keyframe in a frozen video-JEPA space. Task and process counterfactuals help the slots preserve execution details, while the predictor selects demonstrations from a bank. Post-training with keypoint tokens enables human-hand conditioning on robots. Experiments on LIBERO and real robots show that JEDI supports many-shot context; LIBERO objective controls show improved success and demonstration following over action-only compression. These findings support query-future prediction as a training objective for preserving execution-relevant information in compressed demonstrations.
ScheduleGen: Demonstration Generation via Skill Scheduling for Multi-Arm Imitation Learning
原摘要
Multi-arm robot platforms, including bimanual and humanoid robots, have the capability to complete tasks with lower cycle times than single-arm systems, but they are more difficult to safely control due to the presence of multi-arm constraints. The paradigm of training generalist robot policies from massive datasets is a promising approach to address general-purpose multi-arm manipulation, but the acquisition of large multi-arm manipulation datasets remains a bottleneck. Automated demonstration generation can alleviate this burden by synthesizing new demonstrations from a handful of source demonstrations, but existing algorithms ignore multi-arm constraints and as a result often induce unsafe and unsuccessful behaviors. We address this limitation by introducing ScheduleGen, an integrated planning & scheduling algorithm for multi-arm demonstration generation. We evaluate ScheduleGen on 28 simulation task variants, including seven externally authored RoboDojo tasks and settings inaccessible to prior systems; it achieves 79.6% mean data-generation success and trains policies with 65.5% mean success. ScheduleGen policies outperform those trained on a state-of-the-art data generation baseline, and achieve 50-80% success across eight real-world variants through zero-shot sim-to-real and real-to-sim-to-real transfer. Videos and more at: https://schedulegen.github.io/
Smooth Action Chunking Via Movement-Primitive Representations for Imitation Learning
原摘要
Imitation learning has become a widely adopted approach for vision-based robot policies, owing to its conceptual simplicity, scalability, and ability to leverage large-scale datasets. As these policies have grown more capable, action chunking has become their standard interface. At each decision step the policy outputs several future actions at once. Backbones from diffusion policies to large vision-language-action models all share it. Whatever backbone produces the chunk, its temporal structure is learned only implicitly. The commanded trajectory is therefore jerky both within a chunk and between successive chunks. On real hardware this appears as visible vibration and as repeated saturation of the follower's velocity limit. We address this issue by incorporating a movement-primitive-based trajectory representation into action chunking. Specifically, a trajectory segment is represented as a linear combination of smooth basis functions, yielding smooth trajectories by construction while leaving the policy architecture, training objective, and inference procedure unchanged. The same representation also yields a closed-form, inference-time correction for the second source of jerk. We condition the predicted coefficients so that the new chunk passes through a via-point at the previous chunk's last commanded action. This correction needs no retraining and, unlike asynchronous Real-Time Chunking, applies to policies queried in one shot. We instantiate it on a one-shot (ACT) and an iterative (DiT) backbone and evaluate in simulation and on a real bimanual ALOHA platform. The representation lowers within-chunk jerk by an order of magnitude on the one-shot backbone and by 2.4 times on the iterative one, with task success statistically non-inferior. The conditioning then removes 73-84% of the boundary discontinuity, at negligible per-step cost.
Teaching a Tree to Recover: Online Distillation of an LLM Supervisor with Counterfactual Replay
原摘要
Autonomous mobile robots commonly pair a global planner with a local model predictive controller (MPC), but nonconvex obstacle avoidance and a limited horizon can make the robot freeze in complex layouts. Deciding whether to replan, wait, or call for help is a supervisory decision. Recent work queries a large language model (LLM) supervisor on every anomaly, which is slow and costly. We instead distill the LLM online into a decision tree. After each training episode, counterfactual replay labels recoveries as needed, unnecessary, or harmful. These labels retire unhelpful rules. In simulation, on 20 unseen layouts where the MPC alone freezes, the tree handles at least 18 correctly across all seeds, either by reaching the goal or by calling for help when no feasible path exists. The tree matches both an always-query LLM supervisor and expert-designed rules, while issuing no LLM queries at test time. Handwritten rules cannot anticipate the long tail of situations a physical robot will encounter. Online distillation is a promising remedy: the tree handles familiar cases, and the LLM is consulted only for new ones, whose validated recoveries become new rules. Language models can thus also serve as designers of supervisors rather than only as runtime supervisors.
Learn to Modify: Self-evolving Multi-agent Refinement Framework for Conversational Text-to-Motion Generation
原摘要
Despite rapid progress in text-to-motion generation, existing methods are commonly designed for single-shot generation. When users are dissatisfied with specific motion details, they are often forced to regenerate the entire sequence from scratch, which is computationally inefficient and potentially destroys previously established kinematic context. A practical generation system should instead support iterative user feedback and refine only the affected spatio-temporal regions while preserving the remaining motion. Therefore, we introduce a conversational motion generation paradigm that requires the system to coordinate instruction understanding, motion generation, localized editing, and quality assessment. Recent advances in LLM-driven multi-agent systems provide a promising foundation for such role-specialized coordination. To tackle these challenges, a Self-evolving Multi-Agent RefinemenT Framework (SMART) is proposed for conversational motion generation. Within SMART, to preserve semantic consistency, we design a semantic-guided masked motion editing mechanism, which precisely grounds natural language feedback into spatiotemporal motion regions to enable localized refinements without altering unedited regions. To reduce redundant exploration, we propose a memory-based self-evolving strategy that dynamically accumulates motion editing knowledge from interaction history and reuses past successful experience. Extensive experiments demonstrate that SMART effectively supports multi-turn conversational motion generation and enables efficient motion refinement.
OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels
原摘要
Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.