Papers for 2026-11-18
10 papersMoViC: Real-Time Humanoid Whole-Body Control from Monocular Video Streams
原摘要
Real-time whole-body imitation from monocular video requires both a robust universal tracker and high-quality real-time reconstruction. We present MoViC, a framework that uses live RGB video as a control signal for humanoid robots without wearable tracking devices. The framework combines monocular human motion reconstruction, robot retargeting, and a transformer-based behavior foundation model. The policy receives proprioceptive history, a single explicit next-step reference, and a compact frequency-domain motion representation that supplies temporal context without explicitly stacking future reference frames, which reduces the input dimension and network size. During deployment, our extrapolation method bridges the 10-Hz visual estimation with 50-Hz controller, enabling asynchronous visual processing and policy execution. Hardware experiments further demonstrate highly dynamic motion tracking and device-free teleoperation of bimanual and single-arm manipulation tasks from live monocular RGB input. Project page: https://movicproject.github.io/ .
XMimic and XSoma: Learning Humanoid Motion Tracking and Locomotion in Under a Minute
原摘要
We present XMimic and XSoma, which learn humanoid motion tracking and locomotion on rough terrain in under a minute of training. Both follow SuperMimic, which learns a world model of the robot and optimizes the policy with analytic gradients through short rollouts imagined in this model. Existing implementations of this method do not make use of larger GPUs, as every training iteration is a long chain of small GPU operations that run one after another. XMimic and XSoma therefore shorten this chain and run the steps of every iteration at the same time on up to four GPUs. We compile the complete training loop with JAX, including the MuJoCo Warp simulator. For locomotion, XSoma leaves only the dynamics of the robot to the world model and computes everything else exactly, including the terrain height under the feet. It learns with a horizon of one second and without a critic. On four H100 GPUs, XMimic learns to track all 40 LAFAN1 clips with the Unitree G1 in 0.86 minutes, 3.7 times faster than BlinkMimic on one GPU. XSoma reaches the tracking target that Holosoma's tests set for FastSAC in 0.77 minutes, 12.3 times faster than FastSAC on one GPU, while needing only an eighth of its environment steps.
Driving the Style: Velocity-Conditioned Whole-Body Control from Motion Demonstrations
原摘要
Achieving human-like behavior on humanoid robots has advanced rapidly by leveraging motion-capture demonstrations rather than hand-crafted cost functions. Adversarial imitation supplies a style signal that lets a policy fulfill a task while adhering to a desired style, but is difficult to transfer to hardware. Whole-body tracking through reinforcement learning instead deploys reliably and imitates demonstrations faithfully, but the resulting policies are conditioned on the future reference, so they require a reference trajectory at runtime and can fail when the motion differs from the training data. We train a humanoid policy directly with whole-body tracking rewards while restricting its actor to compact locomotion commands and robot observations. Reference motion supervises the reward and privileged critic, without supplying reference joint trajectories to the actor or requiring teacher distillation. The demonstrated style is thereby encoded in the policy through the tracking reward, so the robot reproduces the whole-body style under commanded velocities. Trained on a single random-walk motion and commanded with velocity profiles from held-out motions, our policy reaches at least 98\% success in simulation and completes every trial on the Unitree G1. On held-out slow walking, whole-body tracking drops to 2\% success and command-conditioned distillation to 56\%, and both fail on the real robot. On the trained motions, the joint position error of our policy stays within 8\% of whole-body tracking, and it has a higher style coverage than adversarial motion priors (AMP), which fell on the real robot without a safety crane.
QTOP: Scaling Humanoid Motion Tracking with Quantile Critics
原摘要
Learning human motion tracking policies through reinforcement learning (RL) has emerged as a core capability that underpins a majority of recent progress in humanoid whole-body control. However, achieving generalization to unseen motions at high fidelity requires jointly scaling training to thousands of GPU and dataset hours. This work hypothesizes that motion tracking is inherently compute-bound because training on a diverse set of motions introduces learning interference, similar to multi-task RL. To tackle this, we propose Quantile Tracking Optimization (QTOP), which improves sample efficiency by introducing a distributional advantage estimate conditioned on state and reference pairs. QTOP outperforms on and off-policy RL baselines both in simulation and real-world tracking scenarios on multiple datasets by up to 10\%. Furthermore, we establish a scaling law for QTOP and find that, aside from scaling predictably, dataset size has minimal impact on performance for moderately sized GPU hour regimes.
Ego2Sim2Humanoid: Agentic Real-to-Sim for Learning Loco-Manipulation VLAs without Robot Demonstrations
原摘要
Imitation learning for visuomotor policies typically relies on teleoperated robot demonstrations, which are costly because every episode requires a trained operator controlling a physical robot in real time through teleoperation interfaces and wearable body-tracking hardware. Egocentric glasses capture human demonstrations without a robot or handheld grippers, yet they track only the head and in-view human hands, and directly copying human motion to a robot with different stature, arm reach and hand morphology fails to produce feasible contacts. \method{} converts egocentric glasses recordings into physically verified robot training trajectories. An agentic real-to-sim stage reconstructs collision and textured visual assets from the recorded RGB-D and head streams, completes unseen surfaces when needed, and predicts target contact bands on the manipulated objects. During motion adaptation, a grasp planner turns each contact band into a feasible robot wrist pose and finger closure, bilevel stance optimization plans collision-free standing postures that keep hand targets reachable, and a whole-body motion generator synthesizes lower-body locomotion and out-of-view arm motion. Two-stage motion correction then blends visibility transitions kinematically and trains a reinforcement-learning tracking policy in physics simulation under agent-designed semantic rewards, completing manipulation phases even when the object leaves the camera view. Rendering the reconstructed scene through the robot's onboard camera along the optimized rollout yields synchronized robot-view images, proprioception and verified action labels. Fine-tuned exclusively on this converted dataset, without real-robot demonstrations, GR00T N1.7 performed loco-manipulation tasks autonomously on a Unitree G1. Project page: https://robonana.github.io/ego2sim2humanoid/
Leaning Over to Reach Far-Away Objects
原摘要
We study supported reaching to extend a humanoid robot's workspace by bracing against the environment for stabilization using a straightforward yet capable whole-body model predictive control (MPC) approach, exclusively with local sensing and fiducial markers. While typical solutions for whole body humanoid control aim at avoiding or accommodating contact, contact is explicitly required to reach objects placed on surfaces far out of normal reach. We employ sampling-based MPC for whole-body leaning, bracing, reaching, and recovery on a Unitree H1-2 humanoid. The controller runs in real-time at 34 Hz on a laptop, transfers sim-to-real, extends reach by about 50 cm beyond the unbraced standing workspace, and sustains the loaded posture for over four minutes, before pose estimation drifts. The controller reaches the commanded target in 89% of trials and completes the full reach-and-recovery cycle in 81%, across 54 trials spanning six targets and three table heights. We further characterize why such a small real-time sampling budget is sufficient, finding that temporal persistence of sampled actions and exploration scale strongly govern success, while CEM provides the widest operating region over planning rate and model mismatch. These results establish a real-world baseline for online, contact-rich humanoid manipulation. Code, videos, and full hardware details are available at https://h12leaner.github.io/
TMA: Sim-to-Real Forceful Humanoid Manipulation via Tactile-Driven Motor Adaptation
原摘要
Recent humanoid loco-manipulation in articulated environments has largely focused on geometry-dominant interactions, where success is primarily determined by geometric alignment and motion execution. In contrast, forceful multi-finger manipulation requires the robot to adapt to real-world uncertainties in contact and interaction dynamics. We present Tactile-Driven Motor Adaptation (TMA) and an integrated whole-body system for zero-shot sim-to-real forceful humanoid manipulation, and study round-doorknob opening as a challenging benchmark requiring stable multi-finger frictional grasping, sufficient torque generation without slip, force-regulated pushing, and whole-body stability. TMA structures policy learning around interactions observable through tactile feedback, uses cone geometry as an inductive bias for multi-finger contact representation, and adapts motor behavior online from tactile history. An upper-body manipulation policy is trained alongside a pretrained general locomotion controller to coordinate dexterous interaction and whole-body stabilization. Trained entirely in simulation, TMA transfers zero-shot to a Unitree G1 humanoid with BrainCo Revo2 multi-fingered hands and substantially outperforms standard Rapid Motor Adaptation (RMA) and reactive tactile policy baselines across four commercial round doorknobs in the real world.
Recovery-Guided Model-Based Diffusion for Safety-Critical Legged Locomotion
原摘要
Safety-critical high-speed legged locomotion requires motion planners to balance safety foresight with online computational efficiency. Although short prediction horizons reduce rollout costs, they provide limited safety foresight, and strict safety constraints severely restrict the feasible trajectory space. We propose a recovery-guided model-based diffusion (MBD) framework for safety-critical legged locomotion. It incorporates a learned terminal recovery critic into short-horizon trajectory optimization. Specifically, the critic approximates the worst-case future clearance margin along rollouts of a designated recovery policy. We introduce a feasibility-guided refinement strategy that combines within-horizon constraints and terminal recoverability at each sampling stage, while retaining feasible elites to mitigate sampling-support loss. Across 50 paired randomized Unitree Go2 obstacle-avoidance trials, our approach achieves zero collisions and 98% strict-clearance success, while requiring substantially less computation than long-horizon MBD baselines. A project page is available at https://zack4417.github.io/rg-mbd/.
ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation
原摘要
Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.
WinDEX: Metric 3D Hand Motion Reconstruction in the Wild for Dexterous Teleoperation and Policy Learning
原摘要
Human manipulation data are widely used to train robots for human-like dexterity. However, low-cost, large-scale collection in the wild remains challenging. Existing methods remain limited in geometrically grounded metric-scale reconstruction, real-world generalization and inference speed. We present WinDEX, integrating (1) geometric-temporal optimization for metric 3D hand annotation from in-the-wild egocentric stereo videos, combined with visual-inertial SLAM for world-frame reconstruction; (2) WinDEX-Net, an end-to-end, fisheye-native network combining calibrated stereo, local detail and temporal context, with a data-model flywheel of model-assisted annotation and retraining; (3) distilled models for offline reconstruction and causal streaming, supporting reinforcement learning and teleoperation; and (4) low-cost CyberCap stereo-inertial capture, forming the WinDEX-Hand dataset with 1,000 hours of training annotations and held-out human-annotated in-the-wild 2D and independent optical motion-capture evaluation sets. Offline reconstruction runs at 43.61 FPS and causal streaming at 171 FPS. On held-out data, offline reconstruction achieves state-of-the-art accuracy: 14.5 pixels in-the-wild reprojection error and, with visual-inertial odometry, 37.29 mm world-frame joint error. We achieve 7.6 and 3.6 times the task success rates of reinforcement learning policies trained with WiLoR and HaWoR motion references, respectively, and demonstrate real-time arm-hand teleoperation. Project website: https://fruitrabbit.github.io/WinDEX/.