Papers for 2026-07-15

10 papers
Yunkang Cheng, Yutong Wu, Menghan Li, Shihe Zhou, Mingguo Zhao
总结: 本文提出一种基于对抗运动先验的强化学习框架,利用独立采集并重定向的动作捕捉数据训练类人机器人学习 Pump Glide 和 Push Glide 两种轮滑步态,并在仿真中验证其步态质量、速度跟踪、转向能力及奖励设计效果。
原摘要

Humanoid roller-skating is difficult because the robot must coordinate whole-body balance, rolling contacts, and velocity-dependent posture regulation. This paper presents an adversarial motion prior based reinforcement learning framework for two humanoid roller-skating gaits: Pump Glide skating and Push Glide skating. The two gait datasets are collected independently through motion capture and retargeted to the humanoid robot separately. The retargeted data are then smoothed and resampled into reference motion states for AMP training. The two gaits are learned by independent AMP training pipelines with separate reference datasets, separate policies, and independent reward architectures. Simulation experiments are designed to evaluate gait quality, velocity tracking, turning, and gait-specific reward ablations.

Zhengmao He, Moonkyu Jung, Hyeongjun Kim, ... , Jemin Hwangbo, Jie Song
总结: PAKE通过将全身移动操作分解为部分参考运动生成与低层模仿控制,并利用Kinematic Normalizing Flow在潜空间中探索冗余可行动作,使带机械臂的四足机器人在仿真和真实任务中实现了更高精度、更大可行工作空间和更稳定的全身控制。
原摘要

Loco-manipulation has recently shown promising capabilities; however, achieving high-precision control, managing the high-dimensional action space induced by many degrees of freedom (DoFs), and fully exploiting the inherent redundancy of whole-body systems remain challenging. In this paper, we propose a novel whole-body control framework that effectively addresses these challenges by decomposing the complex loco-manipulation problem into partial reference motion generation and low-level imitation control. We introduce a new Kinematic Normalizing Flow (KNF) model, trained on a large-scale kinematic dataset, that generates diverse yet feasible partial reference motions. A high-level controller is then trained to navigate the KNF's latent space to exploit redundant solutions, while a low-level controller ensures physically feasible and accurate motion execution. We validate our approach on the quadrupedal robot equipped with a six-DoF robotic arm. In simulation, experimental results show that our approach significantly outperforms state-of-the-art methods in terms of tracking accuracy and feasible workspace coverage. For hardware deployment, we evaluate the system over 24 episodes across 8 different mobile loco-manipulation tasks. The system achieves end-effector pose-tracking errors of 4.5 cm and 0.14 rad, while maintaining accurate locomotion tracking with linear and angular velocity errors of 0.1 m/s and 0.01 rad/s, respectively, outperforming competitive baselines. Our method represents a practical and powerful solution for accurate and generalized whole-body loco-manipulation in high-DoF robotic systems, with promising potential for diverse downstream robotic tasks.

Yunhai Feng, Natalie Leung, Jiaxuan Wang, ... , Haozhi Qi, Preston Culbertson
总结: REGRIND展示了一种极简的“人类演示重定向+残差强化学习”流程,可仅凭一次人手示范学习灵巧操作策略,并在剪刀、螺丝刀等接触丰富任务中零样本迁移到真实多指机器人手上。
原摘要

Recent work in humanoid whole-body control has found success with a simple recipe: retarget human motion to robot kinematic references, then train policies via reinforcement learning (RL) to track them. But how does this recipe transfer to dexterous manipulation? The answer is not obvious, as manipulation involves complex, contact-rich dynamics and requires delicate regulation of contact modes and forces. We present REGRIND, a minimalist retargeting-guided RL pipeline that learns dexterous manipulation policies from a single human demonstration. REGRIND retargets human hand-object motion to a robot reference that preserves hand-object spatial and contact relationships, trains a residual RL policy in simulation to track object-centric keypoints along that reference, and transfers the resulting policy zero-shot to hardware with careful system identification. The resulting policies produce fluid, human-like behavior on two different multi-fingered hands across contact-rich tool-use tasks, including operating a pair of scissors and turning a screwdriver. Through systematic hardware experiments, we identify and analyze the key factors that govern sim-to-real transfer in dexterous manipulation, offering practical guidance for retargeting-based learning in contact-rich settings. Videos and code are available at https://yunhaifeng.com/REGRIND.

Muqun Hu, Yuhao Zhou, Kabir Ray Malik, ... , Yu She, Yan Gu
总结: TAC-LOCO 是一种融合触觉阵列与本体感知的四足机器人全身强化学习控制框架,可在动态移动操作中自适应调节抓握力、稳定跟踪运动并防止物体滑落,实现抓握力降低 47% 且掉落率低于 1%。
原摘要

Dynamic loco-manipulation requires legged robots to coordinate whole-body motion while maintaining stable physical interaction with grasped objects under uncertain external forces. While tactile sensing has been widely studied for robotic manipulation, its role in dynamic whole-body control remains largely unexplored. Existing works without tactile feedback commonly grasp firmly rather than regulate the grasp according to the interaction. We propose TAC-LOCO, a tactile-augmented unified reinforcement learning framework that encodes tactile array observations from compliant grippers into a compact latent representation and joins it with proprioception for unified control of the legs, arm, and gripper. With effective grasp stability reward design, the policy learns to simultaneously track body velocity and end-effector trajectories, moderate grasp force, and prevent object slip under both gradual load changes and sudden release events. We deploy the policy zero-shot on a Unitree Go2 with an Interbotix WidowX 250 arm and tactile gripper, demonstrating dynamic tactile-informed loco-manipulation under varying external interactions, achieving a 47% reduction in grasping force and an object drop rate of less than 1%.

Evelyn D'Elia, Weishu Zhan, Giulio Turrisi, ... , Wei Pan, Daniele Pucci
总结: SKooP 将形态对称性与自编码器学习的 Koopman 动力学预测结合用于强化学习,使腿式机器人在复杂双足运动任务中以更快收敛、更高奖励和更好仿真迁移能力学习到等变策略。
原摘要

Reinforcement learning (RL) algorithms classically suffer from poor sample efficiency. In robotics, a recent line of work has emerged addressing this problem by encoding physics priors in the learning process. However, most of these approaches are validated on well-defined, low-dimensional benchmark systems rather than high-dimensional robots with complex nonlinear dynamics. In this paper, we introduce \textit{SKooP (Symmetric Koopman Predictions)}, an approach combining the advantages of morphological symmetries with those of a Koopman model learned via autoencoder to enhance policy learning. SKooP learns a Koopman model of the system dynamics alongside the policy. The resulting Koopman predictions are used as privileged observations for the critic, allowing the agent to learn based on smoother, more informative features. We also incorporate group symmetries into the actor, critic, encoder and decoder networks to produce a highly equivariant policy. The SKooP approach is validated via in-depth analysis of the learned Koopman models and symmetric policies to showcase how each of these influences the agent's performance. We also show that the learned policies are transferable to different simulation environments. Our results show that SKooP consistently reduces convergence time and increases the learned reward for multiple challenging bipedal locomotion tasks on a quadruped robot. Project page: https://evelyd.github.io/SymmetricKoopmanPredictions/

Ye Yuan, Kehan Chen, Xinqiang Yu, ... , Jiawei He, Zhulin An
总结: DA-Nav将商业地图的方向指令转化为自车视角2D图像平面上的离散空间定位,并通过思维链式偏差评估与轨迹恢复实现城市尺度视觉语言导航,在仿真和真实机器人中均显著提升成功率与长距离鲁棒性。
原摘要

City-scale outdoor navigation is currently hindered by the heavy reliance on dense maps or costly navigation supervision. In this work, we introduce a novel paradigm for leveraging directional instructions from commercial navigation tools (e.g., Google Maps). To bridge the gap between commercial instructions and executable navigation actions, while mitigating long-horizon error accumulation through robust trajectory recovery, we propose DA-Nav, a Direction-Aware vision-language Navigation framework that reformulates navigation as a discrete spatial grounding problem on the egocentric 2D image plane. To achieve trajectory recovery, DA-Nav employs a Chain-of-Thought (CoT) reasoning process encompassing deviation assessment, action prediction, and target grid selection. We further introduce ReDA, a dataset that provides direction-aware instructions and recovery trajectories to enhance spatial grounding and support CoT recovery reasoning. Extensive experiments in CARLA demonstrate that DA-Nav achieves a high success rate of 56.16% in unseen urban environments, outperforming existing State-of-The-Art (SoTA) methods while maintaining a substantially stronger recovery capability. Furthermore, without fine-tuning, DA-Nav seamlessly adapts to both quadruped and humanoid robots, enabling stable kilometer-scale closed-loop outdoor navigation in complex real world environments.

Deniz Kerimoglu, Junnosuke Kamohara, Jiyeon Maeng, ... , Ye Zhao, Daniel I. Goldman
总结: 该论文表明,通过调控双足机器人脚底齿板的间距和深度来主动操纵颗粒斜坡的地形响应,可将足地作用力维持在接近屈服阈值,从而显著提升机器人在可流动斜坡上的稳定行走能力。
原摘要

Bipedal robots are challenging to control because they operate close to instability, where small variations in foot-terrain contact can rapidly destabilize locomotion. On rigid terrain, bipedal robots mitigate this fragility by using well-established contact mechanics and control strategies. On flowable surfaces such as granular slopes, foot contact can induce large surface deformations and solid-fluid-like transitions, coupling terrain effects with robot dynamics, leading to underperformance or failure. This is partly due to the lack of reliable methods to represent the dynamics of flowable terrain, making it difficult to account for terrain effects in locomotion design. Here, we investigate how controlling terrain response can improve bipedal locomotion on granular slopes by studying the terradynamics of cleated feet, thin plates emanating from the foot soles. Systematic studies of a small-scale (1.4 kg) robophysical biped reveal that cleats with sparse and dense spacing lead to excessive terrain yielding and resistance, respectively, degrading performance and leading to failure. An intermediate cleat spacing distributes interaction forces to maintain substrate stresses near (or below) the yield threshold, enabling walking on granular slopes up to 30 degrees. Guided by these principles, we design a foot that actively adjusts cleat depth and accommodates both rigid and granular terrain. We also demonstrate that the principles of effective foot-terrain interaction translate to a larger (15 kg) autonomous biped. Our study presents an alternative to conventional body-centric robot control approaches, which regulate terrain-induced effects through body motion, by instead regulating terrain interactions through limb-centric approach.

Haidong Cao, Wenjun Cao, Quanhao Li, ... , Zuxuan Wu, Yu-Gang Jiang
总结: SegDiff通过将示教分解为关键姿态间的运动段,并结合扩散模型与动态时间集成,实现了可实时自适应、稳定且长时域一致的机器人操作模仿学习策略,在仿真和真实场景中显著优于现有方法。
原摘要

Imitation learning enables robots to acquire manipulation skills from demonstrations by mapping observations to actions. Existing approaches predict either short-horizon continuous action sequences or discrete keyposes. However, continuous prediction methods suffer from compounding errors due to short prediction horizons and struggle with multi-modal action distributions, whereas keypose-based methods necessitate an external planner, constraining real-time applicability. To address these challenges, we introduce SegDiff, a closed-loop visuomotor policy that integrates the strengths of both paradigms. SegDiff decomposes demonstrations into motion segments between keyposes and learns to predict the continuous trajectory from the current state to the next keypose, enabling long-horizon prediction with real-time refinement. Furthermore, we leverage the capability of diffusion models and DDIM inversion to propose a Dynamic Temporal Ensembling mechanism, which allows the policy to efficiently respond to dynamic environments and mitigate discontinuities caused by inconsistent multi-modal sampling. SegDiff demonstrates significant performance gains over existing approaches across various simulated and real-world scenarios, indicating its strong ability to reason over extended temporal dependencies while maintaining real-time adaptability and control stability.

Paul Garnier, Jonathan Viquerat, Elie Hachem
总结: 本文提出用编码智能体直接搜索可执行且可解释的反馈控制启发式规则来进行主动流动控制,并在13个基准中有10个达到或超过最强深度强化学习基线,同时具备更好的可解释性、可迁移性和物理意义。
原摘要

Active flow control involves nonlinear dynamics, partial observations, and computationally expensive simulations, making controller design particularly challenging. Deep reinforcement learning (DRL) has emerged as a powerful framework for such problems, but its success typically relies on large numbers of simulator interactions and produces neural-network policies whose decision process often remains difficult to interpret. In this work, we investigate a different paradigm: instead of optimizing neural-network parameters, we use modern coding agents to search directly for explicit executable feedback laws. We introduce a constrained heuristic-learning protocol in which an agent iteratively proposes, evaluates, and revises controller implementations while interacting exclusively through the public benchmark interface. The proposed framework is evaluated on 13 active flow-control benchmarks spanning one, two, and three-dimensional problems and compared against the strongest available DRL baselines under identical simulation budgets. The discovered heuristic controllers match or outperform the best DRL policy in 10 of the 13 environments while remaining compact, interpretable, and directly inspectable. Beyond aggregate performance, the resulting controllers reveal physically meaningful feedback mechanisms, transfer successfully across more challenging configurations, and remain competitive under varying Reynolds and Rayleigh numbers, actuator counts, and observation sparsity. These results suggest that heuristic learning through coding agents constitutes a credible and complementary alternative to conventional reinforcement learning, combining competitive performance with physically interpretable controller representations. Prompts and source code are available at https://github.com/DonsetPG/fluid-heuristic-learning.

Haitong Ma, Haldun Balim, Yang Hu, Bo Dai, Na Li
总结: 本文提出一种从零开始用强化学习训练的单一扩散策略控制器,通过简单策略损失、反向课程生成和目标中心表示,在稀疏奖励仿真中学习多形状方块推动任务,并能在不同目标位置、形状、重量和摩擦条件下零样本迁移到真实机器人环境。
原摘要

Diffusion policies have shown promising empirical performance in representing and learning complex maneuvers for robots using behavior cloning (BC). In this paper, we explore training diffusion policies from scratch using reinforcement learning (RL) for multi-task robotic manipulation. Specifically, we aim to train a single diffusion policy for block-pushing tasks with multiple shapes. The proposed framework features a simple policy loss function, which is a reweighted evidence lower bound used in BC-based diffusion policy training and can seamlessly serve as the policy learning module in RL algorithms. To address the exploration challenges arising from the absence of demonstrations, we incorporate reverse curriculum generation and objective-centric representations. Combined with the expressiveness of diffusion policies, our design supports learning of multi-task block-pushing policies in our sparse-reward simulation setting. We further evaluate whether the trained diffusion policy transfers in zero-shot to real-world tasks under varying environmental conditions including goal positions, block shapes, block weights and surface friction, providing evidence that this pipeline can transfer to our real-world block-pushing setup under the tested variations.